What gen is your Glock?
Sent from my Pixel 4 XL using Tapatalk
Printable View
Ramshot has some load data for lead in a .357 SIG.
https://www.ramshot.com/wp-content/u...ide8.0_WEB.pdf
I shoot the Accurate 35-125YG in my glock (with KKM barrel) and with a full case of AA#9, I'm sending those pills in the 1400 fps range.
I also use this same boolit in my 350 legend and am sending it in the 2500 fps range under a solid charge of W296...
The .357 SIG seems like it should use PC boolits instead of lubed. The lube groove can take up a lot of the neck length, if you happen to be able to keep the lube groove out of the powder (is that critical though?). I’m tinkering with lubed boolits, and I’ve used the 125 grain bullet from Hunter’s Supply with good results... but I still suspect that PC will ultimately be my choice here.
Attachment 300034
Thanks to the contributors of this (older) thread, I’m just now going down this road.
Attachment 300035
@dansedgli (sorry, I know this is an older post) -- but what mold are you sing for these 171s?
Also what powder charge, and is it powder coated, gas checked or plain?
I am interested in heavier weight setups for this, that's why asking
(I am using starline brass)
Did you guys see the other post, that LEE dropped a new 356-147-TC mold?