Working on some tes loads for my old Ithaca SxS using some hard #1 buckshot I cast up last summer. Coyotes beware!
Printable View
Working on some tes loads for my old Ithaca SxS using some hard #1 buckshot I cast up last summer. Coyotes beware!
I loaded up More .410 .390 ball loads for testing.
CW
Sized and primed 300 .40S&W cases same for 200 .45acp cases and 200 30-06 cases today will finish the job tomorrow charging and seating bullets then into the ammo cans they will go. The GI Ammo Cans are getting very heavy!
Loaded 750 45 acp with 200gr rnfp and 6.2 gr BE 86 also went to the range and shot the CZ97 , Ruger single 7 and single six :) a good day .
Cleaned up one bench and finished depriming 9mm. I have about 400 to run thru the wet clean now.
Sent from my iPhone using Tapatalk
Nothing yet, I'm waiting for my son to get here so I can sit with him and guide him thru loading some 10mm.
Just realized I have 2100 - 218 Bee and 1900ish 22 Hornet that need to be loaded.... guess I will be loading those for a while!!
Sent from my Pixel 5 using Tapatalk
Deprimed and sized 500 9mm cases, loaded 50 270 win, and sized 500 9mm boolits
My son came over and we loaded up 100 rounds of 10mm. He set up the press and pulled the handle. We had a great time.
https://uploads.tapatalk-cdn.com/202...e0b8efd225.jpg
Sent from my iPhone using Tapatalk
Cast a few hundred .45's to try a few more of my new PP colors from Smoke.Attachment 273551
Cast 249 boolits for the 43 Spanish.
Attachment 273603
I poured up a pile of Lee 309-113 Soup Can Boolits
prepped my brass and as we are in lock down again stripped my 1022 completely and cleaned all the crud out .sonic cleaned my non strip-able moderator .hope this new lock down isnt to long .
I just bought a new to be mold, and figured I’d warm it up and cast a few.
Accurate 46-430 VG, dropping at .462 and 416gr with my blend (little heavy handed on the tin)
https://uploads.tapatalk-cdn.com/202...9782e90a1e.jpg
Sent from my iPhone using Tapatalk
Cast about 500 36-180LGs... I FINALLY got my Norma 200 load feeding 100% with these guys.
I did a few things in the reloading room yesterday;
I tumbled a handful of .303 British brass, de-primed a couple of those cases that had boxer primers, and sharpened the wet grey matter between my ears on the challenges of Berdan primers.
Last night finished the 208gr subs for 300BO, finished off a lb of IMR target loading 9mm (200rds), re-filled some 45-70 cases that I pulled down with IMR 3031 and seated some 405gr Fp's that were pulled from those cases. And last but not least pulled primers from a box of 45 GAP that I had pulled down for a buddy (ordered 1000 rds of the wrong ammo) put those primers and 6.5 grains of unique in 45 acp cases and re used the pulled bullets. It was a good day for reloading got a few projects finished now on to some new ones.
Right now reforming 30-06 brass to 9.3x57. As it turns cooler I have some other brass to anneal in the garage.