Quote:
Thompsoncustom, are those loads for 9mm? If so, 4.7 gr of bullseye might be a bit too hot. The Lyman cast bullet handbook does not list the Lee 124, but it has the RCBS 124gr and calls for 3.7 start and 4.1 max. The Lyman max loads usually seem to be pretty stout.
I have been loading my 9mm with a Mihec 130gr hp with 4.2 gr of Unique (1050 fps) getting zero leading and great accuracy. I have been using range lead, tested a coated boolit and it was only 8 bhn. Are your boolits big enough, I size mine .358 and use a 38S&W expander plug in the Lee 9mm powder through expander die (keeps the boolit from being swaged down)
Ya I have about 6 manuals but didn't look through any of them for this load. I used quickload and my chronograph and it comes out to about 1200fps and just over standard pressure.