I found a steel set of 32 H&R RCBS dies. I cleaned them and set them up in July press to replace the Hornady set I really do not like...
Darned if the sizer die isn’t too short and will not properly size a 327 piece of brass!!! Grrr
So I relegated them to the 32 Long loading and set up a set for the 218 BEE.
I loaded five pieces with 4227 and a 46g Speer FP bullet.
Dumped about 300 BEE cases in the big tumbler and snapped it on with Walnut and cleaner.
CW