I need some assistance. I bought some of the Hi-tek from Bayou Bullets, I guess its Black color. Anyhow, I tried it for the first time yesterday 5 parts coating, 5 parts acetone, 1 part catalyst. The issues I encountered were that the coating would dry before I finished tumbling, so it didn't get into the grooves on the first coating. On the second coating I managed to get full coverage but they were still dry to the touch after only a minute or two of tumbling. Each coating was baked at 375 deg for 8.5 minutes in a preheated toaster oven. They passed the smash test and the acetone test. I sized them, loaded them, and thought I was golden but after only 10 rounds through my 45ACP my barrel was full of crud. See pic below. Could you advise me on what I might be doing wrong and how to improve my results? Thank you.
Attachment 66700