-
Got guys doing various 416 HEs..
One just built a 416 HE, just been testing it a few days..
And using 168gr of HBMG 475 gr CEB, tested it, in good
conditions, 2 shots at 1800 yards and was within
a 1/4 of minute accuracy...A few shots at shorter ranges
had same accuracy. Ed..
-
Big brother Ed, that sounds great a bit hard to believe but if you say so it must be true ! !
1800 yards and 1/4 inch accuracy.
I wish you all the success and best of luck.
Regards,
Ajay K. Madan
Super Blazing Sabots
-
MOA at 1,800 yards is over 18 inches so about a 5 inch group. Still would be phenomenal accuracy.
BB
-
Sounds like you have developed a super anti-anything made of aluminum beast.. 1800 yards ! That is as good as the m68 105 mm main gun on a M60-A1 MBT would do.
Mike in LLama Land
-
That's some impressive shooting. 1/4 minute isn't out of the question for a good benchrest gun. I'd like to see a 5 or 10 shot group to confirm, but even 2 shots into 5 inches at 1800 yards is an impressive feat! Wish I hade the machinery to build a dinosaur slayer like that. Just have to play with shotguns till then.
-
Big brother Ed, wondering where have you been, hope all is well.
I wish you all the very Best and much success ! !
Regards,
Ajay K. Madan
Super Blazing Sabots
-
I didn't do the gun, just the cases.
The great accuracy is due to K&P barrels and great stock and action....
More about our 416 HSM from BMG brass, and
our 416 HE & 460 HE from our 585 HE cases
Got reamers for 375 HE, 416 HE and 416 HSM,....
460 HE & 460 HSM are all spec'd, got HE reamer
soon have HSM reamer...Our HSMs have a Wea type
radius on the shoulder..
The fellow that set up our 416 HE in an ELR rifle
and got 1/4 min accuracy,
They got some game out west over 1400 yds..
.Here is the gun they set up.
Using a K&P 34" barrel on a BAT action.....Ed
http://www.gunownerstv.com/jacobgun.jpg
-
-
And have got 460 HSM specs setup, the impetus for that is some
asking about one and new great line of 458 bullets CEB now has.
It will hold more powder than the 416 HSM and will get
a 572 gr as fast as 416 HSM gets a 475gr.....Ed..
-
Big brother Ed, you always amaze me. Merry Christmas and a Happy New Year to you and all our friends.
https://i.imgur.com/vW6zzSH.jpg
This man is a legend, shared his vast knowledge ! !
He ventured in to the dark with his " Loads From Hell " and above all shared his loads that smacked some shooters and they saw " stars."
He deserves every bit of respect, how many of you all agree with me ?
Best regards,
Ajay K. Madan
Super Blazing Sabots
PS: Bravo brother Pashiner " Happy New Year to you and your family "
-
Agreed! Ed has more good big bore wildcatting knowledge to share than any other source I've seen.
-
The guys that did the super accurate 416 HE did another
416 HE that has an 8" longer 42 inch K&P barrel..
Used a Stiller action and same load with 475 gr bullet, as in
first gun and and gained about 200 fps with good accuracy.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.
And loads they used are not the highest speed loads
the cartridge is capable of....Here is print with specs for
the 416 HE reamer chamber ....Ed....
http://www.gunownerstv.com/416heream.jpg
-
More about he guys that did the accurate 416 HE, they did a
416 HE that has an 8" longer 42 inch K&P barrel..
Used longer barrel and the same load with 475 gr bullet, as used
in the first gun and and gained about 200 fps with good accuracy,.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.
And loads they used are not the highest speed loads
the cartridge is capable of....Here is picture.......Ed....
http://www.gunownerstv.com/jacobgun2.jpg
-
Greetings brother Ed, it great to see you kicking ***** with your Hot Hot loads.
Please take all precautions and stay safe.
Best regards,
Ajay K. Madan
Super Blazing Sabots
-
Greetings big brother Ed, you have not been very active lately, how are things with you and your family?
Please take all precautions and stay safe.
Best regards,
Ajay K. Madan
Super Blazing Sabots
-
Away for a time, sickness..
Here is print with chamber reamer specs for the
416 HSM chamber..There are 3 base sizes we have,
depending on actions used. Got reamers for all 3..
Got cases for all of them..
Our cases are public domain, so that is why I post
info and specs. To help guys do their own setups.
Manson makes reamers I use,,, Ed.
http://www.gunownerstv.com/416hsmream.jpg
-
Big Brother Ed, I hope all is well now, I sure missed you and am happy to hear from you.
If you have recent picture of your self, please post it !
Best regards,
Ajay K. Madan
Super Blazing Sabots
-
Have no pic of me hosted but thre is one with the hot sexy lady
on my FB page the daughter put there,,,,
Here is reamer print with chamber reamer specs for
the 460 HSM chamber .Couple guys getting set
to do 38-40 inch heavy 458 target barrels...Ed....
http://www.gunownerstv.com/460hsmream.jpg
-
With 40 inch barrel 416 HSM ,475 gr, get 3650, over 13,000 ft lbs muzzle energy.
Got guys getting set to have 38-40 inch 458 barrels made for 460 HSM.Ed..
-
More info on this gun, we did it for testing 416 HSM with a rebated rim,
to check in intermediate size actions, with the longer, stronger, bolt lugs, Ed..
http://www.gunownerstv.com/intertargetp.jpg