Finished the new Wall oven conversion today.
all wired up with only 2 heating elements working.
All elements are powered through 240 volt 40amp SSR's. the control power comes from the REX C-100 SSR that then sends signal power to the heating element SSR's. They get a bit warm, but nothing too hot. they all have heatsinks on them.
Circulation fan stops when the door gets opened to save heat.
Baked one tray of 2Kg of bullets. set it at 200 Deg C for 10 minutes. Bullets came out very dark.
2 trays of 2KG each same time and temp. Bullets were also dark for both trays.
Going to try more tomorrow, but start at 7 minutes for 2 trays and see how it goes.
Here is the monster baking the 2 trays.
Going to replace the rotary timer with a Digital timer for more accurate timing. Ordered one from Ebay just now.
http://i193.photobucket.com/albums/z...424_172813.jpg