Well, it shoots, is safe, and functions
You now have it and are not throwing up when you look at it
So all appears to be HUNKY-DORY
Mike
Printable View
Well, it shoots, is safe, and functions
You now have it and are not throwing up when you look at it
So all appears to be HUNKY-DORY
Mike
let's get some holes punched in paper that last load will take down anything in North America .
Hahaha Yup But I tuned it up and my final load is 45gr IMR3031 with the 371grRN ..........Than I took my 45-70 RCBS boolit seating die and cut
5/16'' off so I could a crimp on these loads!! I did good ! a nice tidy crimp !!!! My primers look ! the carbine isn't overwhelming to shoot ! The chamber
is like near perfect !! They did a super job on the Barrel !!!!!
some photos
Ol Deuce
https://s20.postimg.org/5mg0cvq0d/IMG_4470.jpg
https://s20.postimg.org/xch6rk48d/IMG_4472.jpg
https://s20.postimg.org/cqxtlwx9p/IMG_4466.jpg
Gentlemen................Thank You so very much for all the input!:2_high5::goodpost::awesome::guntootsmiley: Every thing worked out very well.
The test fires ,the load information, Thank you !!!! My Friend will have to get it on paper LoL His shoulder not mine:roll: Oh ya The last 5 I
put together were the 300grHP. with 42.5gr of IMR4227 app 2100fps! That should get his attention ! Love it !:Fire::Fire:
Ol Deuce
Awesome