Originally Posted by
Bookworm
I use the Lee sizing lube all the time.
I have a small spray bottle, maybe 4 ounces. I squirt about an inch long strip of Lee lube in there, and fill it with 99% isopropyl alcohol.
Shake shake shake. It dissolves, or at least goes in suspension.
Lay out the brass on an old cookie sheet. Spray three or four times, it dries in minutes. Size as usual. No need to clean it off.
Works like a champ.
The lube will settle out after a while, but a few shakes mixes it back up. Cheap, very cheap lube that works.