I am trying to justify a new Ender 5 and a Dillion 1050 to my wife... looks like this is turning into a one sided loosing argument for me.
Sent from my SM-N970U using Tapatalk
Printable View
I am trying to justify a new Ender 5 and a Dillion 1050 to my wife... looks like this is turning into a one sided loosing argument for me.
Sent from my SM-N970U using Tapatalk
Looks like TylerR is still on a roll!
Maybe it was supposed to be.....but it's aluminum unlike the Pro 2000 or the Dillon 1050 which are both cast iron....more like a 650 with two more stations.....but they fumbled out of the gate over the priming system. When Dillon came out with their 650 it was way above anything else out there and the flaws were held as minor annoyances for the most part ignored until they were fixed. RCBS on the other hand came out with their 7 station press with the 650 and 1050 deeply entrenched, debugged, and with many happy customers. Not an easy market to enter with a new design yet to be debugged. I saw the possibilities....the general market hasn't yet, if they ever will. I love mine. Priming system now works fine, but I still prefer the Pro 2000's APS priming system, but I don't see a way to mod it in.
Now Frankford Arsenal is bravely trying to break in with their FX-10.....hope they succeed....Dillon really does need some competition. Can you say 10 stations? Supposed to come out end of 2021......and you only have to build a 3d printed bullet feeder.;) RCBS should have started with a case feeder/collator developed and offered. They just didn't risk quite enough. When you are owned by a conglomerate, decision making at that level is in the less dedicated overlord hands.
https://youtu.be/d6Dpi7-hEmk
I went right to the 160's to make it hard right off the rip :) Nice looking boolits btw.
Wow! If that press is as reliable as a Dillon, sign me up :D
I love what Dillon makes, but they are way too pricey in my opinion; let's not even talk about Mark 7, yikes!
I run an XL750 and was thinking of getting a RL1100, but what am I really getting for the extra $$$?
True, it has a better mechanical system, swaging capabilities and a casefeeder, but how is that worth an extra $1500???
The worst part of the RL1100 is the "7 station" crap. You can't even run a powder check and bullet feeder unless you seat/crimp in the last station.
Seriously Dillon, how about 10 stations for that kind of money.
Oh man!! That really is impressive. I might have drooled on my keyboard. I never got a Dillon as much as I want just never pulled the trigger and been living with the Hornady LNL and my co-ax. But getting just the base unit and adding feeders could make that a winner. Now if they can hurry and release that!
I understand now. You connect the two pieces with the bolt making the angle adjustment while the bullet feeder is on the bench. Then you just hang the bullet feeder on the case feeder. I need to either purchase a bigger washer or a shorter bolt because my current washer slips into the Mount_Dillon_Base and the bolt then is too long to tighten against the Mount_Dillon_Hang_Base part. I'll add a change suggestion to the manual to call out a larger washer or shorter bolt.
*Edit: Nevermind I just saw anuccite added the bolt length change to the manual suggestions already.
$3000 (USD) + shipping and tax.
I am sure this project could work with it. However, for the price you would pay, it is embarrassing that they would ship it with a crappy Hornady casefeeder.
I think they are going to replace that casefeeder with their "premium" version now that Lyman bought them.