2 Attachment(s)
Made my own sizer for my 45 auto
Attachment 67686Attachment 67687
The press I want wont be in until the end of June at Midway or any place else so I made my own sizer. Slugged my High Point 45 at .4525.
2x4 from Lowe's $3.00
2 3/8" washers @ .12 ea (bought 4 just in case)
11,5mm drill bit @ $10.00
8 #6 pan head sheet metal screws @ .08 ea
Thought I would get .4528 or .4530 with the drill bit but after sizing with a lead sinker it was .4540 or a hair less. That's .0012 over what the pistol slugged so think it's okay.
Any comments would be helpful as this is all new to me.
Edit: The picture on the right is the sinker I used to slug my pistol.