Originally Posted by
gwpercle
1.Make sure your lube groove(s) are lined up with a hole in the die .
2.Make sure the boolit base isn't lined up with a hole in the die .
3.Look at plunger , mine has a flat end and a slightly concave end , make sure you use the flat end with a flat based boolit .
4. Go easy-easy on the pressure ... 90% to 95% filled lube grooves will do the job . Overpressuring will force lube under base ... ease off , apply just enough pressure to fill and if you partially fill the groove , turn the boolit 90 degrees and finish filling with a little more light pressure .
You have to develop a feel for just the right amount of pressure ... practice filling 95% and leaving a clean base ... develop the "Fine Touch" .
Gary