Originally Posted by
BrentD
Gellot, I would, for certain, shoot the smaller diameter bullet before doing anything else. The true answer to your question will be on the target. Assuming that fails (which I doubt), you could look for a thinner paper. If you can't find thinner paper then you could buy or make a sizing die that would size your current bullet down the small amount needed for a perfect fit.
I'm ab it mystified by your dimensions. Measurements to 1/10,000 of an inch are pretty challenging for most people. Heck I can't measure much better than 1/1000. Also, I find Pedersoli barrels to be pretty tight. I cannot imagine starting with a bullet that is only 0.0001" that's 1/10,000" less than the land diameter of most rifles, with Pedersoli's, in my experience, being on the short side of that! Most people would find that your naked bullet would fit pretty well in their rifles with no paper at all.
What is R&PC?. I know Ballards 1 through 9, and Pacifics, Montanas, and Galleries, but not R&PC.