I'm going to start loading for the 7.92x33 KURZ and want to be in the cat sneeze area. Any recommendations?
Printable View
I'm going to start loading for the 7.92x33 KURZ and want to be in the cat sneeze area. Any recommendations?
Interesting... I’ve read about this cartridge, but have never seen a firearm for it nor have seen any brass. Graf’s does have it in stock. Curious, what are you shooting it in?
Also curious about what rifle?
For cat's sneeze loads I'd look at the NOE 325-133-FN PB loaded over Bullseye (3 - 5 gr....loaded to 800 - 1050 fps). Or for a potential bit more the NOE 328-135-FN GC loaded over Unique up through 1800 fps.
I had a SAKO in that caliber and it was a great rifle. Unfortunately I only shot J-words thru it.
I have stubbed a 94 Stevens shot gun barrel with this calibre. Reamed and chambered in a 7.92 Mauser barrel and fitted it to the shot gun barrel. Put a red dot reflex sight on it. I've also been thinking on a Mauser type action made into a single shot with this calibre. I love single shots and have a few to play with. RBs,Rugers,37 win. 94 stevens.
I would think that you could use 7.62 x39mm starting data. For cats sneeze follow Larry's advice.
Tell us more about those rifles! I'm thinking of doing a stub with a section of MN Barrel in a 20-gauge. I will probably chamber it for 32 H&R Magnum. I made one in a 12 gauge Topper stubbed to 44WCF last year and it has been a delight.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I always wanted a 7 x 33 mm Sako but I have never seen one.Quote:
Originally Posted by stubshaft
Sent from my SAMSUNG-SM-G930A using Tapatalk
I have four 94 Stevens barrels that I've stubbed and one Win 37.only one butt stock for each. For the 94s 7.62x39, 7.92x33, 7x30 waters. With factory loads for the 7x30 I found that the firing pin hole needs to be bushed. The Win. 37 is 32 H&R mag. I would like to make a barrel in 38 s&w for it.