I was doing a search for Henry's and this popped up: https://www.traditionsfirearms.com/c...y/outfitter-g2
Anyone have any experience with the company/guns? Finding a 357 mag rifle and one under $600 is a very intriguing idea.
I was doing a search for Henry's and this popped up: https://www.traditionsfirearms.com/c...y/outfitter-g2
Anyone have any experience with the company/guns? Finding a 357 mag rifle and one under $600 is a very intriguing idea.
Buds has them: https://www.budsgunshop.com/catalog/...3-9X40+%26+CAS
I've been looking at them for a couple weeks.
No iron sights has kept me from buying.
:(
Has anybody thought about rechambering one to 357 Maximum?
I'm sure someone will. I don't understand why people do that. Seems like those that do sell them off. If you want a more powerful cartridge get the 44 mag. Or is it one of those "because I can" things.
I'm sure you could get a Skinner sight for the back sight and just get the front sight drilled and tapped on, still cheaper than a Marlin.Quote:
Originally Posted by WebMonkey
I'm interested in this conversion because I have 125 rounds of loaded ammo and no weapon to fire it.Quote:
Originally Posted by kungfustyle
Keep an eye on Graybeards forum in the Handi Rifle section. You'll see 357 Max listed every now and then.
Thanks, will do.Quote:
Originally Posted by kungfustyle
They aren't making a 357. They have the 308 and 44 mag, but no 357.
The rifle listed in the buds gun shop link is a 357 for $432 with scope.Quote:
Originally Posted by kungfustyle
Nevery mind, I think you may have been referring to the CV line of single shots
Well Ruger, CVA, Rossi and Henry. Seems like Traditions is the only one making the 357 under $500.
A nice .357 single would be fun to play with on the range .
Jack
I'm glad I bought my 357 Handi Rifle when i did. It seems like the demand for a good single shot 357 is high so maybe Traditions will fill that void? Looking at the MSRP for the bare rifle without the scope seems a bit high as compared to what the Handis were but maybe they are worth it? or not? I've never handled one so am wondering what the quality, fit and finish are, etc.
I know a lot of folks have reamed their Handi to 357 Max and to each their own. I've had no desire to do that though. I've fired everything from 38 Colt Short, 38 Colt Long, 28 Special and 357 out of mine - both smokeless and BP nd am very pleased with he results (cast only). The chamber on mine is deeper as most are and I did pick up some 360 DW Starline brass to use in it. I have two different NOE 200 gr molds - FN and RN. I haven't had the opportunity to really work with that combination but I have loaded up dummy rounds and they chamber just fine in my Handi.
I kind of agree on the 44 over the 357 Max but if you only have the one rifle in 357, it does give you the option of the MAX without having to have a barrel in 44 or another rifle in 44. I passed on a Hani chambered in 45 Colt and wish now that I had bought it.
If someone has or has handled one of the Traditions, it would be nice to hear your thoughts on them.
One reason to ream to max was the long throated chamber NEF put in the rifles. Also, you can get a proper leade in the chamber with the correct reamer. SAMMI spec has a forcing cone in the barrel.
sounds/looks like they're attempting to fill the defunct H&R gap. IF that's the same 'traditions' company that hawks those spanish built trad muzzleloaders, beware.
I have shot the 44 mag traditions rifle and it was really accurate. I really didint like the plastic stock but it wasent that bad . The rifle looked decent .
SAAMI Max reamer drawing also specifies a pilot that is .346" diameter, which will give you an off-center chamber like as not. Call Manson. About 5-6 years ago Dave and I worked out a neat way to regrind that lousy forcing cone into a proper throat. At the same time we made it a loose-pilot reamer so you can use a pilot that fits your bore correctly. It didn't even cost the moon and starts.Quote:
Originally Posted by geezer56
I did something like that on my .430 reamer ..... Made up a Like DuMore grinder using a dremel mounted on my tool post of my lathe !!! Thing you canQuote:
Originally Posted by uscra112
do when there is a need! It worked out Great !!!! .44 cal is Great
Ol Deuce
Man we went down a rabbit trail. Has anyone used one of these guns? Are they worth it?