Lee Classic Cast Press Cheap Ram Extension
I didn't see this posted anywhere so I figured I'd share.
I took the Lee 50 bmg extension and cut the shell holder portion off. Then drilled it out and tapped it for 1/2-20". The stud that is in it for the picture was just my fixture for polishing it on my drill press. It is definitely cut crooked, don't worry I haven't made any punches for it yet.
It worked out great and only cost $17. I'll be making a smaller OD extension for a ejection system.
https://i.ibb.co/pX0YgrV/20190118-170943.jpg
https://i.ibb.co/zSmkmmT/20190118-161106.jpg
https://i.ibb.co/P5XtBC1/20190118-161101.jpg
https://i.ibb.co/80zZBzD/20190118-161054.jpg