Printable View
Well how did I do? First time casting bullets, melted down a bunch of 115gr 9mm that was powder coated and recast them as 124 gr 9mm and will be powder coating them in the next few days (will be the first time for powder coating aswell)
https://uploads.tapatalk-cdn.com/202...31db9e070f.jpghttps://uploads.tapatalk-cdn.com/202...cf5aee655f.jpghttps://uploads.tapatalk-cdn.com/202...06d97eca29.jpg
Sent from my Moto E (4) using Tapatalk
Looks like you did yourself proud! Good job.
Thank you very much.Quote:
Originally Posted by kmw1954
Sent from my Moto E (4) using Tapatalk
looks nice
so since you melted down powder coated I'm guessing you had lots of filth and had to clean the lead somehow? did you flux it and if so how and how did you know when it was clean enough?
Oh yes, I used wax for to float the filth to the surface and man it was bad. I melted and cleaned to make new inhots then melted the ingots to cast the bullets do basically 2 cleanings.Quote:
Originally Posted by guy_with_boolits
Very little trash from the newly melted ingots. One thing about the powder coating I did notice is it stayed intact and floated to the top, even keep it's color so it's pretty tough stuff.
Made the mistake of melting those down in a bottom pour lee pot, had to clean the pot twice while doing it and once when I was done.
The new ingots had do very little trash in them I was surprised. I did cast them pretty hot and my ingots where frosted,think that helped to seperat the powder coating.
Sent from my Moto E (4) using Tapatalk
When I had no more trash floating to the top and couldn't pick up any more I figured it was a clean as I was going to get it.
Wow - frist time casting and you got that many? It took me a while to be able to get through 10 or 20lbs of alloy. ;)
Well I did melt down the old bullets and make the new ingots on Saturday.Quote:
Originally Posted by 44Blam
Casted those (659) today.
First time I ever use a bullet mold in my life, took about an hour to get the hang of the heat as I was to cold or to hot for a while but just wore a pair of US issue frog gloves and but the bad bullets right back in the pot along with the sprue.
Took me about 2 hours or so to do them all.
I have read so much on this forum about good and bad bullets it helped a lot.
Sent from my Moto E (4) using Tapatalk