It shows 2 weights 92gr and 121gr does it have a hollow base thingy that makes it lighter?
I see a few for sale all the time but do not have the hollow base with it.
Printable View
It shows 2 weights 92gr and 121gr does it have a hollow base thingy that makes it lighter?
I see a few for sale all the time but do not have the hollow base with it.
The 92 gr is shorter and has one less lube groove.:lovebooli
The book I have shows the same # for both the 92 and the 121 thats why I am wondering.Quote:
Originally Posted by nascarkent
{ie} if they both share the same part# how do you know what one you have/ordered:?:
You must ask first. I have a SC 92 gr & it's not marked either, but the box is plainly marked.
It is an older design with the shorter version weighing around 92 grains.The longer version is around 120 grains and has been fairly popular for use in the 9mm. I have also used the heavier version in the 38 special. It casts easily and I imagine that both versions would use the same top and seating punches. LLS
What LLS said. It is a fine 9mm boolit in its longer/heavier version.
I have both of the 358242s. On mine, the lighter one is marked in stamping on the side 92 gr. in the same lettering that the number is stamped in.
Neither of them are hollow base.
The 92 geain does fine in a .380 Auto and the 125 (actually 121 graon does well in the 9mm./beagle
I just bought a mold from Old Goat, cast up a few hundred a couple days ago. Single
lube groove and it is stamped on the side of the mold "90 gr" from the factory. Mine
came out at about 94 gr. I have not shot any yet.
Bill
The 92g and the 120 are both good designs. The 92g is loved by my 380 Bersa, and the 120 is loved by my 9s...
So. To clear this up, the 92 Grn has one lube groove and the 120 has two????
Roy
Hooker53
I have recently gotten the 120 grain version and see that it is also listed for the 380 acp. This is definitely a "heavy" boolit for the little 380, but I plan to give it a try. Anyone had any success with it for their 380 acp?
I have both the 92 and the 120 gr. versions as well. I use the both in 38 Colt Short/Long - the 121 gr works great in my 9mm and 38s too. I probably use more of the 121 gr. versions now than anything else I cast up. 92 gr. has one lube groove - 120 gr. has 2 lube grooves. I got the 92 gr. to use in .380 - haven't loaded any yet as I got rid of my 380 semi and will eventually pick another one up. I love both of 'em.
I did not have success with the heavy version in 380 cartridges. It will shoot, but the difference in POA/POI was in the order of 8 inches high and 4 inches left at seven yards when fired from a Walther PPK/s. I had similar results using heavy for caliber boolits in my Beretta Tomcat. The lighter version works very well, but I have replaced it in my loading with the RD 358-100 TC which is a six cavity mold. Lee makes a similar mold , TL 356-95 TC, in a 6 cavity also. You get a lot of boolits per pot when casting these smaller boolits.Quote:
Originally Posted by smoked turkey