Printable View
If you were to use these on brass does it ruin the stick. I have some very delicate work to accomplish on a mold cavity that I don't feel comfortable using micro steel files on. Thank you.https://uploads.tapatalk-cdn.com/202...b2bc2713a5.jpg
Sent from my XT1650 using Tapatalk
Never used then on brass but if they do load up I would think a good copper remover would clean them.
I think you could clean them up with an eraser, no harm at all.
I have a crock stick cleaner (course eraser) that cleans them no problem. Even brass. Lansky Eraser Block - on amazon.
Didn't know about these https://lansky.com/index.php/product...block-blister/ Just ordered one. ThanksQuote:
Originally Posted by Minerat
I just scrub with bar keepers friend or some other scrubbing powder and a touch of blue dish soap.
Coarse eraser for ink works well too.
Sent from my iPhone using Tapatalk
I use the same formula as fiberoptic. Works great.
If you have an ultrasonic cleaner it might work.
If you use them use kerosene or a light soap water to lube them and keep them from loading when a stone loads it also quits cutting. Another is to make a brass rod and use diamond lap or very fine lapping compounds with it. Even a wood form impregnated with fine compounds will work well. Make it long and when changing grits just cut the end off. The hardwood stick and compound was how we polished delicate details at work. Oak works but the open grain dosnt take compound as well. Maple does well walnut does good, THe old standby in the trade was rose wood.
I've used Bon Ami and a couple of other powder cleansers to clean the round crock stick knife sharpeners I have. They are fine enough to load up with steel. Brass will be worse, as far as loading, but it will be easier to get off, too.Quote:
Originally Posted by RedHawk357Mag
You can clean brass off of anything with FeCl3 dissolved in 15% HCl. HCl will take care of Zn and FeCl3 will take care of remaining Cu.
Have been using them for almost 40 years, have used them on steel, brass and aluminum. Clean them the same way as steel, Comet powder and hot water.
ya I always used comet powder also. just wet it sprinkle some on, then tooth brush or fingers seems to magically take metal off in some way, no clue how but it does.
Wow! appreciate everyone weighing in. Learned some stuff today. That's definitely a positive. Everyone have a fantastic day and be safe.
I was gonna say the same thing about Dawn/Comet with hot water. Works for Arkansas stones as well, cleans all the metal out of the pores. If you have a stone that is oil soaked like an old India stone spray with carb cleaner. It will eat up all the old oil and make it look new.
Emc45 thanks for the additional information. I actually have some stones that I have inherited that meet that description. Thanks for great information.
Sent from my SM-T387V using Tapatalk
Quote:
Originally Posted by JimB..
Actually, mine cleaned up using a Brillo pad in warm running water and a little elbow grease.
.