Do you have empty SPP or SRP primer trays and empty boxes you could spare?

I have some time on my hands so, I'm learning to reload primers. Tedious, but, very exacting. There are many many formulas to make the powder. Fun to play around with the chemistry. I have even made a primer cup push-through resizer. The only issue I have is storing them safely. In a bag, plastic box or bottle they could rattle around and be dangerous or they could lose the powder inside. I saw a photo of an early primer tray made of wood where the primers sat on their sides in slots, I thought that was interesting. Relatively easy to make. When they are empty I have always just thrown them away so I am in need. Anyway, I am wondering if anyone has the plastic trays and maybe the sleeves for SPP or SRP?

you can 3d print some or drill holes in wooden blocks if you dont find the actual trays. couple of people over on the mewe primer reloading group have printed trays for sale.

Will 209 primer trays work?

PM me your mailing address.

PM me your mailing address, I have been saving my primer trays.

PM sent.

Probably do. Depends on the last time I emptied the trash can in my reloading room. How many are you looking for?

I too most likely have some in my trash can I could send. If you are still looking,, mine would be WW WSP ones. PM me if needed.

I have some if you still need any.

Here is another way to go for those who do not have - or can not get empty Factory Primer Trays:

Attachment 304439

The plastic trays are from 22LR or 17 HMR plastic trays. In the picture a Large Rifle Primer is in the top Tray; and a Small Rifle Primer is in the bottom tray. A box (Bottom/Top/ and maybe sides) can be fabricated from light weight cardboard or heavy weight paper. Some scotch tape or painters tape to keep it all together. Then write on the Cardboard/Paper what type of primer it is and other info as needed.

I would not trust in wooden trays/blocks. I would fear some humidity inside them.

Quote:

---

Originally Posted by MUSTANG

Here is another way to go for those who do not have - or can not get empty Factory Primer Trays:

Attachment 304439

The plastic trays are from 22LR or 17 HMR plastic trays. In the picture a Large Rifle Primer is in the top Tray; and a Small Rifle Primer is in the bottom tray. A box (Bottom/Top/ and maybe sides) can be fabricated from light weight cardboard or heavy weight paper. Some scotch tape or painters tape to keep it all together. Then write on the Cardboard/Paper what type of primer it is and other info as needed.

---

Oh yeah, I got scads of those too ;)

Issue solved. Thank you Lancem I'll wait for them to arrive.

Thank you all who replied. Lancem was kind enough to respond and follow through. Good on you Lancem.

Quote:

---

Originally Posted by wilecoyote

I would not trust in wooden trays/blocks. I would fear some humidity inside them.

---

Back in the dark ages when I started reloading, primers came from the factory in wooden trays. Don't recall any problems from humidity.
Home made primers might be more susceptible to problems with humidity, though

Quote:

---

Originally Posted by quack1

Back in the dark ages when I started reloading, primers came from the factory in wooden trays. Don't recall any problems from humidity.
Home made primers might be more susceptible to problems with humidity, though

---

Fun Fact:
Recently (since after the shortage started) I swapped some vintage primers in original wood trays to a friend. They had been casually stored in a non-air conditioned room in the upstairs of my old house (in MN) for many years. MN summers can get incredibly humid. All primers were just fine, in fact if they weren't, he could chime in, as he is a member here.

I think the reasons they quit using slotted wood trays was safety, as well as cost.