.........32-20 dies for the 310 tool? I don't find them listed in the usual charts, and it might be nice to have a set for my S&W.
Printable View
.........32-20 dies for the 310 tool? I don't find them listed in the usual charts, and it might be nice to have a set for my S&W.
Number 29 are the .32-20 sets.
yes, you want a set? hope your not in a rush, will be somewhat a made up set
FWIW, because you are neck sizing only, you can also use an M-1 Carbine set. In fact, IIRC, the die code number may even be the same, but regardless, I’m about 98% sure it works that way. :coffeecom Time to check the old list on Cast Pics.
Froggie
Number 29? On which list? :)Quote:
Originally Posted by trooperdan
Ah ha! Got it......somehow I expected it to be under the rifle calibers. Completely overlooked the pistol dies......
Yes, because I have a set in the next room, and no, you can't have it! Bought it off eBay years ago.
I have a couple of .30 Carbine sets, supposedly they will do for .32-20 but there is a difference of about .010 at the mouth of the case.
On the list I have the 32-20 uses a S handle, #3 adapter, #19 priming chamber, 329 muzzle or d/a chamber, with .311 expander.
30 carbine uses S handle, #15 adapter, #23 primer, #29 muzzle-D/A, .309 expander.
So yes the 30 carbine can be used but need a .311 expander, priming chamber and adapter.
I've seen all of these listed on Ebay at times.
Leo
I think the 32/20 uses the #10 priming chamber, same as 218b and 25-20 -- #19 is for the 32 S&W