Inline FabricationRotoMetals2Titan ReloadingStainLess Steel Media
Graf & SonsLee PrecisionADvertise here

Tab Content
  • Drm50's Avatar
    11-22-2017, 12:14 PM
    I bought my first 375H&H in 1968, a Sako. Shortly I had a Rem 700, Win 70 pre 64 and finally a Herters Mauser. I held onto the Sako and M70. The Rem and Herter shot fair but both kicked the Herters the worst. The Sako you could shoot all day with...
    25 replies | 377 view(s)
  • Drm50's Avatar
    11-19-2017, 08:45 PM
    This is true, but you know plugs are not required, we are on the honor system now. Doesn't matter much on Lever guns but guys using Semi autos with removable mags don't seem to count very well. Down here in SE Ohio you only encounter with wardens...
    20 replies | 494 view(s)
  • Drm50's Avatar
    11-19-2017, 03:14 PM
    I only have one right now and it's my keeper. 1st major gun project I ever did and it was mostly done in junior hi shop class back in early 60s. This gun started life as octagon barrel .25 RF. I with help of shop teacher installed a new take off...
    25 replies | 861 view(s)
  • Drm50's Avatar
    11-19-2017, 03:01 PM
    7 shots with a 45/70 don't get it done ? You don't need a cuff you need a Bayonet!:redneck:
    20 replies | 494 view(s)
  • Drm50's Avatar
    11-17-2017, 11:42 PM
    I'm a 2 13/16ths. I'm 67 and all my rifles are pre 64wins, and other older classic type rifles. No Rem700s, Sav 110s ect. Back then I bought a lot of Weaver K series, some Redfields and last scopes I have bought were Leupold. My keepers have been...
    123 replies | 2257 view(s)
  • Drm50's Avatar
    11-17-2017, 01:27 PM
    Some of you guys are lucky, I've got 3 old 30/30s in excellent condition. I can't use them for deer in Ohio. The law is 38 cal minimum, Straight case. But I can use 45/70 or 375win. It doesn't make sense to me but I'm stuck with it. In a few weeks...
    42 replies | 2713 view(s)
  • Drm50's Avatar
    11-16-2017, 01:35 PM
    We use scrap rebar for stake and wrap coat hanger wire around stake, bend ends up to form arms to hold clays. You have to replace wire occasionally but stake last forever. We use a 1/2 dia in vice to wrap the loop for the rebar, the rebar is about...
    7 replies | 371 view(s)
  • Drm50's Avatar
    11-15-2017, 03:17 PM
    Never saw a Cooey pump but looking at picture it resembles a pump once sold under the Noble label and I think they farmed them out to Hardware Brands. Canadian, Cooey had some ties with Winchester at one time. A couple years ago I had a single...
    4 replies | 234 view(s)
  • Drm50's Avatar
    11-14-2017, 12:39 PM
    Just a hollow tube with completely open end will suppress to some extent. Any device that will allow the gas to expand before bullet exiting will do it. But it won't defeat a sonic crack of bullets traveling in excess of the speed of sound.
    32 replies | 1120 view(s)
  • Drm50's Avatar
    11-13-2017, 12:01 PM
    Drm50 replied to a thread Did I Make A Mistake? in Leverguns
    I wish I had the money to buy all the good deals I have come across. I didn't actually pass them up, I couldn't afford to buy them. To me a passed up deal is when you could have bought if you so desired. You can't let hobbies control your life.
    29 replies | 1163 view(s)
  • Drm50's Avatar
    11-12-2017, 09:19 PM
    I have a InterArms PP that I picked up cheap on a trade several years ago. I keep it because it functions smoothly and is reasonably accurate for a pistol of its type. I've had several Nazi marked PPs and they were of better fit and finish but...
    13 replies | 536 view(s)
  • Drm50's Avatar
    11-06-2017, 08:23 PM
    I have a couple 25-2s and a Colt NS 45acp. I have no doubt they will handle 45 GI ball type ammo safely. I use the for Wadcutter Target loads and would not put hard ball through any of mine. It is just fact that Jacketed bullets put more wear on...
    32 replies | 1228 view(s)
  • Drm50's Avatar
    11-06-2017, 08:07 PM
    The Norinco 97 copy is alright if you are buying toys. Not a gun I would want to depend on for Bear or 2 legged critters. $300 will buy a very nice older gun that is more dependable. I have only had one 97 knock off and that was enough. I herd...
    20 replies | 932 view(s)
  • Drm50's Avatar
    11-03-2017, 07:07 PM
    Drm50 replied to a thread Remington 722 in Factory Rifles
    I have had several 721, 722 & 725s. The one that is a keeper was left to me by a uncle, 722 in 222. I was with him when he got it new and a K10 Weaver scope. Excellent shooting rifle in very nice shape. I had a 721 in 30/06 for several years. A...
    32 replies | 6239 view(s)
  • Drm50's Avatar
    11-02-2017, 11:49 PM
    I fooled around one summer with a m70 300H&H and a H&R 300win, shooting groundhogs. I used Speer 130gr HPs / IMR-4350 at approx 3200fps. The H&H shot them like a Target Rifle and it was just a standard rifle. I only had a 6x on it but made a lot...
    15 replies | 617 view(s)
  • Drm50's Avatar
    10-30-2017, 06:15 PM
    Acetone is one of the best solvents, degreasers you can use on guns. Won't hurt blue and leaves no residues. You just got to be careful not to get on any plastic parts or stocks, it will ruin stock finishes and dissolve some types of plastics.
    6 replies | 393 view(s)
  • Drm50's Avatar
    10-30-2017, 10:00 AM
    Marlin was having problems starting in late 80s. Fit and finish were declining, but function problems were not common. I'm not a Marlin collector especially post war rifles, I do have several 100+ year old ones that I would consider collectibles....
    29 replies | 1055 view(s)
  • Drm50's Avatar
    10-29-2017, 03:36 PM
    Drm50 replied to a thread 357 single shots in Single Shot Guns
    You may want to look into a used TC Contender carbine. I'm not into break back rifles but was impressed with a TC/ scope rig that I shot last year. The other break actions all have terrible triggers.
    7 replies | 536 view(s)
  • Drm50's Avatar
    10-29-2017, 03:31 PM
    I've had 3 of them in last year. All used and like new in case. All three came for elderly guys who bought them for house guns or CCW. They never got as far as complaining about accuracy, they couldn't rack the slides. This is main complaint on...
    39 replies | 1671 view(s)
  • Drm50's Avatar
    10-29-2017, 12:46 PM
    If you are looking for lighter trigger for hunting plinking with a more less stock 10/22 you can't beat the Volkswargen kits. Their target hammer kit makes unbelievable difference in trigger pull for around $30.
    19 replies | 519 view(s)
  • Drm50's Avatar
    10-28-2017, 08:32 PM
    Drm50 replied to a thread 6.5 BlowMore in Factory Rifles
    I know the barrel burning story on 264mag. I fooled with them some in early 60s I had two pre 64 M70s. I bought them both used off original owners who weren't loaders. They were getting rid of them because they weren't able to get decent accuracy...
    100 replies | 3784 view(s)
  • Drm50's Avatar
    10-28-2017, 05:53 PM
    Put your money in a S&W, Colt or Ruger. S&W and Colt service style revolvers are not hard to find. Price wise they run about the same as the second rate stuff like Rossi, Taurus and Chater Arms. I agree sights on DAs are not as rugged as fixed...
    92 replies | 3536 view(s)
  • Drm50's Avatar
    10-27-2017, 05:23 PM
    I got a couple 25-2s that I shoot nothing but WC cast target loads in 45AR brass. The problem with 25s is under spec throats in cylinder. Bullet gets "undersized" by the chamber , smaller dia than bore. The only thing you can do in this situation...
    32 replies | 1228 view(s)
  • Drm50's Avatar
    10-27-2017, 09:59 AM
    I have killed a lot of deer with Rem 12 sluggers. Hopefully never have to shoot another one since Ohio got rifles now. For my 45 Colt, a M25 S&W I use same 20:1 mix and 250gr RNFP. I'm had good results on deer and this is only a 820fps load. I...
    11 replies | 427 view(s)
  • Drm50's Avatar
    10-25-2017, 11:36 PM
    The stock on 94-220 are the same. I am not sure if this holds true with the later model 94s. They have series letter with the 94 on right side of action right above trigger area. The Stevens 94s were made a sold under several house brands. They are...
    6 replies | 431 view(s)
  • Drm50's Avatar
    10-25-2017, 11:14 PM
    I'm not into militaries, but I have some 6.5x ??? It is rimmed and has military FMJ bullet. I know it's not Sweede, Jap,or Carcano. Can some one post a picture of this cartridge with head stamp. These are Berdan no doubt? The listing of 6.5s are...
    72 replies | 23063 view(s)
  • Drm50's Avatar
    10-25-2017, 08:27 PM
    I have had several Hornets. That is the only rifle other than a 25/20 my wife will shoot after a 308 whacked her in the head. Used for ground hogs it anchors them good. She was aggravated by them getting back in the hole with 22lr. We had large...
    38 replies | 1653 view(s)
No More Results
About Drm50

Basic Information

About Drm50
Biography:
Army vet..ex coal miner
Shooting & fishing before I could walk
Location:
SE Ohio
Interests:
Hunting,Fishing, Gun Collecting
Occupation:
Contractor

Statistics


Total Posts
Total Posts
528
Posts Per Day
0.99
General Information
Last Activity
Today 12:18 PM
Join Date
06-08-2016
Referrals
0
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check