RepackboxLee PrecisionRotoMetals2ADvertise here
MidSouth Shooters SupplyInline FabricationTitan ReloadingWideners

  • Bent Ramrod's Avatar
    01-23-2020, 10:33 AM
    There is also the Hassle Factor, especially when starting out on a budget. A bottom pour pot needs very clean metal going in; any impurities will get between the shutoff plug and the spout, resulting in leaks, drips and bits of this and that in the...
    21 replies | 250 view(s)
  • Bent Ramrod's Avatar
    01-22-2020, 05:47 PM
    The ARTCA Site has a section on shotgun reloading tools. You could compare your stuff to what they have there, or ask questions if you donít find what you need.
    8 replies | 331 view(s)
  • Bent Ramrod's Avatar
    01-21-2020, 10:06 AM
    The hard spring return is designed to snip stick powder granules in two rather than having to vary the return by hand in order to bump them out of the way as the “visible” block returns to drop the charge. If you try to double the fill and return...
    38 replies | 2729 view(s)
  • Bent Ramrod's Avatar
    01-19-2020, 09:11 PM
    I donít know how applicable this is to your situation, but the most difficult problem in getting into any energetic materials R&D area is that the field is so rarefied. There simply arenít all that many jobs. The Safety Slogan we had was...
    52 replies | 1459 view(s)
  • Bent Ramrod's Avatar
    01-17-2020, 10:44 AM
    People who are good mechanics and good, clear writers are rare indeed. I have several Kuhnhausen books. Even if you donít plan on doing the work yourself, they are valuable for understanding what is wrong, what is needed, and what is to be done by...
    15 replies | 365 view(s)
  • Bent Ramrod's Avatar
    01-17-2020, 10:24 AM
    Bent Ramrod replied to a thread SAECO 2-cavity in Cast Boolits
    Iíve got one that looks sort of like that. The sprue plate says SAECO CUSTOM PRECISION NO 290301 Mine seems to have a longer nose in relation to the shank than yours, though.
    7 replies | 243 view(s)
  • Bent Ramrod's Avatar
    01-16-2020, 10:12 AM
    Iíll take No. 5, the Lee .348win die set without shellholder. PM coming.
    6 replies | 931 view(s)
  • Bent Ramrod's Avatar
    01-16-2020, 10:02 AM
    I’ve had success with frozen screws by putting one of those (good, not cheap) magnetic screwdriver bits into the screw slot, putting a small box wrench over the hex part of the bit, and clamping the whole thing in a vise with thick softwood jaws. ...
    29 replies | 5718 view(s)
  • Bent Ramrod's Avatar
    01-16-2020, 09:22 AM
    Bent Ramrod replied to a thread 4759 in Canister & Surplus Powder
    Iíd buy them. IME, nothing beats 4759, either for cast boolits or for nitro priming in duplex loading. The price is very attractive. I buy a lot of obsolete powders, just to see what they were like. I have a collection of old loading manuals,...
    23 replies | 889 view(s)
  • Bent Ramrod's Avatar
    01-11-2020, 08:06 PM
    You might check with the Olde Tyme Book Store to see if they still have the Dave Gingery books. His first book was how to build a foundry for melting down beer cans and casting aluminum. The second one was casting the aluminum into components...
    22 replies | 794 view(s)
  • Bent Ramrod's Avatar
    01-10-2020, 11:12 AM
    I would say $450 or so American would be my maximum. A friend had one in .35 Remington, with an Indian-head penny inletted into the stock. Donít remember what he paid for it, but he bought it before the ďinvestorsĒ had gotten to that model. I...
    82 replies | 2519 view(s)
  • Bent Ramrod's Avatar
    01-10-2020, 10:42 AM
    The ones I have and have seen try to divide the forming into steps, arranged in such a way that the minimum percentage of cases will be spoiled by the process. For instance, the first die will move the shoulder back without affecting the neck...
    7 replies | 548 view(s)
  • Bent Ramrod's Avatar
    01-09-2020, 03:38 PM
    Iíve got more guns that I can shoot, but if I found a good Stevens 425 High Power in .25 Remington, at a used-gun price, Iíd have to have it.
    82 replies | 2519 view(s)
  • Bent Ramrod's Avatar
    01-09-2020, 11:33 AM
    Generally, the smaller the bore, the quicker it fouls, unless, of course, the powder charges are small in proportion. The calibers you are starting out with are pretty forgiving, and using the better grades of black powder, you shouldnít need...
    42 replies | 1268 view(s)
  • Bent Ramrod's Avatar
    01-05-2020, 10:29 AM
    One of those ideas that look great on paper but are of limited value in real life applications. Donít have any Perfections, but do have a few adjustable moulds, a couple of which Iíve made myself. Also have a couple of the one-piece Cylindrical...
    10 replies | 3500 view(s)
  • Bent Ramrod's Avatar
    01-04-2020, 09:53 PM
    A friend had a furnace that he used to melt bronze with in a graphite crucible. Heíd have everybody over for ďcasting partiesĒ where weíd be pounding sand into wood frames around wood patterns and other models of the stuff we wanted to reproduce in...
    20 replies | 1225 view(s)
  • Bent Ramrod's Avatar
    01-03-2020, 08:48 AM
    I’ve found several Lyman/Ideal HP moulds missing the hollow-point pin. I generally make replacement pins that are almost the full diameter of the hole in the mould, highly polished, with just enough draft to pull out of the casting and the depth...
    10 replies | 432 view(s)
  • Bent Ramrod's Avatar
    12-31-2019, 11:36 PM
    Old-Win, i wasn't ever that great a shot, although I can still keep the signal-to-noise ratio consistent enough off the bench to test ammunition and do experiments. And no shooter has more fun than I do. I also wondered about the potassium...
    40 replies | 1894 view(s)
  • Bent Ramrod's Avatar
    12-31-2019, 12:31 PM
    I have a .44 paper-patch mould that casting at 500+ gr was too long for the twist in my rifle. I had read that the Canadian blackpowder shooters used hollowpoint cast boolits for extra stability at long range (this in the 80s) so I drilled holes of...
    28 replies | 883 view(s)
  • Bent Ramrod's Avatar
    12-30-2019, 08:42 PM
    I also had a low-density batch of Swiss 1F that didnít seem to perform that well, at least in the loadings I previously used. Donít write down the lot number, but it was the first batch I received with the pink labels rather than the blue ones,...
    40 replies | 1894 view(s)
  • Bent Ramrod's Avatar
    12-30-2019, 10:00 AM
    All the evidence Iíve seen indicates that Pressman is right. They were an ask-and-you-shall-receive thing. I checked my ridiculously large pile of the things and found .32-20, .32-40, .32 SPL, but no .32 S&Ws. There might be an example out...
    14 replies | 730 view(s)
  • Bent Ramrod's Avatar
    12-30-2019, 09:13 AM
    I recall seeing them going for $180 and up since production ceased. Paul Jones was sort of the Harry Pope of mould makers. If you define genius as the capacity for taking infinite pains, they were certainly both geniuses. The PJ Creedmoor...
    4 replies | 318 view(s)
  • Bent Ramrod's Avatar
    12-26-2019, 12:37 PM
    The only Mauser I rebarreled was a Siamese Mauser. If the other ones are like mine internally, there is one shoulder on the barrel that contacts the end of the receiver and another ahead of the barrel threads that abuts the shoulder of a ďsocketĒ...
    34 replies | 1548 view(s)
  • Bent Ramrod's Avatar
    12-26-2019, 11:38 AM
    I’ve got a .38 caliber around somewhere, too. It’s a conventional two-piece mould, with the screw adjustment for length added. The cylindrical casting is too small in diameter for any .38 caliber barrel, even if patched with paper. They fit...
    8 replies | 567 view(s)
No More Results
About Bent Ramrod

Basic Information

About Bent Ramrod
Southern Arizona
Guns and Gun Stuff
Happily Retired


Total Posts
Total Posts
Posts Per Day
General Information
Last Activity
Yesterday 09:17 AM
Join Date
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check