4 Cavity Mihec 45 Brass Hollowbase Wadcutter

[happy7]

This buy is now closed
To sign up for one of these excellent molds, PM me your email address and zip code. I will post your zip code here.

This buy will run till our turn comes up with Mihec. When it does, the buy will be closed and Mihec will send out invoices via paypal to the address you provide me with, so the email you send me should be your paypal address.

Price will be $120 plus $20 shipping for a four cavity brass mold with the Cramer hollowbase system.

A solid version (no cramer system) is available for $85 plus $20 shipping. You must make clear to me that you want the solid version! Make sure I have noted it next to your zip code!

This mold is literally like ten times faster than the old single cavity pin type that Lyman made. If you have a 45, don’t miss out on this.

Here is a graphic of the mold. Target diameter will be your choice of .453 or .455 with WW, so let me know on the PM you send.

http://i295.photobucket.com/albums/mm157/happyjoyfully/453395HBWC.jpg

Here is a picture of the 38 mold that was run recently.

http://castboolits.gunloads.com/attachment.php?attachmentid=25382&d=1284477842

Zip Codes

91106 - 455
96055 - 453
37209 - 453
63010 - 455
77377 - 453
49331 - 453
24426 - 453
54235 - 453
74501 - 455
83202 - 453
67005 - 455
91916 - 453
82604 - 453
43221 - 453
74501 - 455
52732 - 453
97213 - 453
99224 - 453

[GLL]

I will take one mould at 0.455".

Jerry

gllewis at pasadena dot edu

[hicard]

I'll take one mould at .453

hicard

hicard at theskybeam dot com

[btreanor]

I'll take one mould at 0.453. PM was sent.

[GLL]

happy:

Double check my PM for this one !

Jerry

[happy7]

Sorry about that. Should be right now.


happy:

Double check my PM for this one !

Jerry

[patsher]

Please help me out in my ignorance. Why a hollow base?

[hicard]

The hollow base helps the bullet obturate and fill out any gaps that might let gas blow by causing leading of the bore. Results are more accuracy and less leading. Some might want to turn the bullet around for an awsome close range hollow point.

[fivegunner]

Hi could I ask what is the weight of the solid bullet???:castmine:

[happy7]

Hi could I ask what is the weight of the solid bullet???:castmine:

I have requested that information, but no reply yet.

[square butte]

Could we have some measurement on this bullet as well?

[happy7]

This bullet will weigh about 274 grains as a solid.

[happy7]

Could we have some measurement on this bullet as well?

The length of the bullet is .638"

[fivegunner]

:smile:I got to have one of these!

[Gunsmoke4570]

PM sent. I see I'm gonna be broke all the time since I joined this board. . .

[Bear4570]

Put me down for the HB version .453, Thanks.

[fivegunner]

Please put me down for one mold .453 . Thanks :smile:

[happy7]

bump bump

[BSkerj]

I'll take one at .453..PM sent..Thanks

[GLL]

BTT:

Jerry

[patsher]

Happy, what will be the weight of this bullet hollowbase?

[happy7]

Happy, what will be the weight of this bullet hollowbase?

235 grains.

[bronte454]

Any idea when this mold will be manudactured. I've been on to many buys but would like to be apart of this one if its gonna be a little while so I can save the money. thanks

[happy7]

I have asked Mihec, but received no answer.


Any idea when this mold will be manudactured. I've been on to many buys but would like to be apart of this one if its gonna be a little while so I can save the money. thanks

[Cristofori]

PM sent.

[45Wheelgun]

I would like to participate in this as well.

PM Sent.

[ia1727]

Me Too--I'm in.

Steve

[happy7]

bump to front page

[Swede44mag]

PM Sent
I'll take one mould at .453
Can we get the pins to make it a solid also?

[happy7]

You just flip the pins upsidedown and you can cast solids.

[Swede44mag]

Please remove me from the list at this time.

Swede

[2hawk]

What the heck, I'm already in for the .38 and .44, might as well make it a trifecta.

PM incoming, H7 :)

[pps]

If this were tumble lube, I'd be in.

[happy7]

Mihec has opened this back up and says we can accept orders for another 14 days. That is about when they will go on the machine. So you fence-sitters have a last chance.

[GLL]

BTT:

Jerry

[jojo]

Sittin' on the fence wunderrin' if this is still open? JOJO

[happy7]

It is still open, but not for much longer I don't think, and it will close without warning.

[jojo]

Thanks for the prompt reply. PM coming your way. JOJO

[happy7]

This buy is now closed

[hicard]

Invoices out yet?

[happy7]

No, but I understand they are in production

[MiHec]

Should be ready for shippment in 10 days :razz:

[ia1727]

Should be ready for shippment in 10 days :razz:

When do you plan to invoice for this and the .44 HP ?

Steve

[happy7]

He did the 38 first, then the 41. He is now working on the 44 and then the 45. I will probably be only a matter of days.

[MiHec]

He did the 38 first, then the 41. He is now working on the 44 and then the 45. I will probably be only a matter of days.

true :bigsmyl2:

[MiHec]

All invoices are out!

If you missing one please PM me.

[jojo]

Payment sent. Thanks, Joe

[hicard]

Payment sent. Thanks Miha

[hporter]

Invoice received, payment sent.

Thank you!

[ia1727]

Got mine today--very nice [smilie=s:[smilie=s:[smilie=s:[smilie=s:

Steve

[jojo]

WOOHOOO!!! Mold arrived today. Any suggestions on alloy? Thanks, Joe

[hicard]

I got this mold this mornings mail. Looks beautiful and thanks for the extra e-clips Miha.

[MiHec]

I still have some over order molds!

If you are interested please PM me.

[MiHec]

I still have some over order molds!

If you are interested please PM me.