Noe 502-847 wfn

[500bfrman]

NOE has agreed to do a mold that will weigh in at about 850 grains. This will be a plain base mold. unless there is significant opposition to that. i.e. if I get many takers that want a gc in this then I will be willing to do that. I don't know if Al will be able to do both. This will be a 3 cavity mold in the big blocks. The boolit is close to 1.7 inches long. The nose is about 1.1 inches long. I am doing this to see what the 500 bfr is capable of. I believe Al can make you a bigger diameter if needed even up the 512 range. THIS WILL NOT FIT IN AN X FRAME. The overal cartridge length will be about 2.7. Al will post pics shortly. and I have no idea if this will stabilize in your gun or not. I think it will work, though it will be an extremely close range projectile. The powder space available will be essentially what is available to most people shooting the 700 grain boolits. Those take up .7 of the case these will take up .6. I am expecting to be able to get 1000 fps out of this in a 10 1/2 inch barrel. This could work in some rifles though I don't know if the bore rider will run into the rifling or how that would go. Will depend upon your rifle.
I will run this for 12 weeks or 15 orders whichever comes first. If I don't get enough even for five. I will still proceed.

The pricing would be as follows.

5 thru 9 orders $160.00 Ea. Plus $10.00 S/H

10 thru 14 orders $123.00 Ea. Plus $10.00 S/H

15 on up $110.00 Ea. Plus $10.00 S/H

Sorry no RG’s but we can make a standard HP in one cavity for $35.00.

We would cut this mould on our deep blocks.

And only offer it as a 3 cavity cut on a 4 cavity size block for heat control.

Thanks

NOE Bullet Moulds

Al Nelson

[500bfrman]

I will take two.

1. 500bfrman - 2

[SwedeNelson]

Something to look at

http://i69.photobucket.com/albums/i80/swedenelson/1111-128-502835GrLFN.jpg

Swede Nelson

[RANGER RICK]

Very nteresting .
I think this would work great in my 500 Cyrus CCM .
Let me do a few measurements ??

RR

[SwedeNelson]

Bump

Swede Nelson

[RANGER RICK]

Swede

Will it be possible to have either gas check or not ???Or is it one or the other not both ??
Thanks

RR

[SwedeNelson]

Ranger Rick

We can cut it with either or both in one block.
This is a interesting bullet, going to try it in a NEF (H&R) 500 S&W

Thanks
Swede Nelson

[RANGER RICK]

Sounds great Swede.
I will take one 3 cavity Gas checked please and thank you.

RR

[500bfrman]

1. 500bfrman 2 both pb
2. Ranger Rick 1 gas checked

[500bfrman]

:Fire:

[500bfrman]

;):x:-)

[500bfrman]

1. 500bfrman 1 plain base mold and 1 gas check mold Both of them Hollowpointed.
2. Ranger Rick 1 gas checked
3. Mohillbilly 1

If anyone is on the fence about money regarding this one, keep in mind NOE is backlogged to close to Summertime right now, so the earliest we would be paying for this would probably be late summer July,August. And we are letting this run for a while yet too.

[DukeInMaine]

Worth repeating......

This will NOT fit in a X Frame S&W 500 Magnum!!!

[Doc_Stihl]

Lemme check the throat on my encore. If it fits, I'll have to have it.....

[500bfrman]

sweet

[500bfrman]

:coffee:

[500bfrman]

:redneck:

[500bfrman]

[smilie=w:

[500bfrman]

this mold can be made up to 512 or so to fit 50 cal rifles if needed.

The list is

1. 500bfrman GC mold HP
2. 500bfrman PB mold HP
3. Ranger Rick GC mold
4. Mohillbilly
5.

[500bfrman]

[smilie=6:

[500bfrman]

:violin:

[RANGER RICK]

500bfrman and swede

Will this have the same depth of crimp groove and the lube grooves as the 513-500 FN GC you ran last year ??

Thanks

RR

[SwedeNelson]

RR

Yes - It is the same Crimp and lube groove.

Swede Nelson

[RANGER RICK]

Sweede

Thanks for the info.

500 bfrman

I need to change my order to a .512 DIA 3 cavity gas check .
Thanks

RR

[500bfrman]

1. 500bfrman GC mold HP
2. 500bfrman PB mold HP 504 diameter
3. Ranger Rick GC mold 512 diameter
4. Mohillbilly
5.

[500bfrman]

:Fire:

[500bfrman]

:coffeecom

[RANGER RICK]

When does this go into production ??
No hurry just wondering.
Thanks

RR

[500bfrman]

probably when we get some more buyers. I would think we need at least five. I know al will do it even if we don't. But this will keep getting bumped till march 1 and then we will see.

[Mohillbilly]

Bump Bump

[500bfrman]

:redneck:

[500bfrman]

:coffee:

[RANGER RICK]

I like big molds !!!!!!

RR

[nes4ever69]

out of curiosity, if it is in the .512 diameter, would that work for a 50 bmg?

[500bfrman]

It might work, but I don't know if you would run into chambering issues with the big wide nose. And I doubt it would be the best choice for any range at all.

[FTF]

Please add me to the list for this. I would want:

1 mold in .502, GC if possible, PB if not

1 mold in .512, GC if possible, PB if not

[colt_saa]

Has this GB died a slow death or is it still waiting for a few more takers?

I need to check out my 12" Encore and see if this is a possibility

[mpkunz]

Al, I'm in for a HP mould making GC bullets. (preferred if offered) . Can you PM me so I can get you payment ? That'll give you the 5th guy to make the minimum.
Mike

[scarry scarney]

Is this buy still on? I'm interested, 1 mold, all cavities, GC please, if this will work for a 50 BMG, count me in please.

[scarry scarney]

Sorry for the confusion. Please withdraw me from this group buy. Thanks

[colt_saa]

IS there any life left in this one? Or has it dropped off the map?

[bbailey7821]

Put me down for one, please. Plain Base should be fine on this monster. This one oughtta fill up the cylinder on the ol' BFR...

[bbailey7821]

Oops, .502 dia.