PDA

View Full Version : Puma twist?



mdi
11-20-2010, 12:19 PM
Offhand, does anyone know the twist rate of a Rossi Puma .44 Magnum? LSI import, purchased 10/2007. I read somewhere that it may not stabilize a 325 gr boolit. I know how to measure it, just lazy this morning...:wink:

44man
11-20-2010, 02:03 PM
I don't know but some scary fairy whispered in all gun maker's ears that 1 in 38" was the way to go.

MT Gianni
11-20-2010, 03:09 PM
Mine stabilizes the Lee310 just fine. It is an older Puma with the medallion on the side.

RobS
11-20-2010, 06:51 PM
My Puma 454 Casull is 1:20 and I believe your 44 mag is too.

mdi
11-21-2010, 12:10 PM
Thanks guys...

mooman76
11-21-2010, 12:50 PM
You can figure out the twist rate without too much trouble. Put a cleaning jag on the cleaning rod with a good tight patch. Mark the cleaning rod where it goes in and several places up the rod. Push it in until the lines meet up again from turning (if possible) or where it turns half way around and measure the distance it took.

felix
11-21-2010, 01:09 PM
Early Puma guns were 30 twist, independent of caliber. ... felix