PDA

View Full Version : Star Sizer ??????



RANGER RICK
09-30-2006, 09:45 PM
For those that use start sizers . Do you have problems with lube on the nose's of your bullets ???
For some reason I get lube on the pushed through bullets , not alot but each one need sto be wiped off.
Any suggestions ??
Thanks

RR

Swagerman
09-30-2006, 09:50 PM
You probably need to make some small adjustments on the bullet punch die, keep trying to adjust until you get bullets that don't have lube ooze getting past the seated bullet.

Also, perhaps theres too many lube holes open on the lube die body, you can plug up some of those holes with NO. 7 lead shot...thus, restricting the area of lube on the bullet.

Jim

fecmech
09-30-2006, 10:53 PM
Also has to due with pressure on the lube resevoir. Less air pressure if you are using air or less spring pressure if you are manual. If using hard lubes that require heat, less heat.

rbwillnj
10-01-2006, 06:51 PM
fecmech has the right idea.

Dutch4122
10-01-2006, 07:59 PM
fecmech has the right idea.

I second that!

Lee W
10-02-2006, 06:32 PM
fecmech right on.
It is the same thing that Magma said when I called with the same problem. I found that temperature had the most to do with it.