WTB: 25-35 Stuff

[45 2.1]

I'm looking for the following items:
Lyman 257325 mold
RCBS 25-100-FN Mold
Lyman 310 dies in 25-35
LEE loader in 25-35
Lyman .259 or .260 H&I sizer
If anybody can help out here, please PM me.

[beagle]

Randy Davis
E-mail Address(es):
Ideal310@aol.com
Personal Information:
Address:
4203 Imperial Drive
West Linn OR 97068-3626
Phone: 503-650-2085

Check Randy out for 310 stuff. I'd say he probably has a set of .25/35 310 dies on hand./beagle

[Shuz]

45 2.1--I don't think Lyman has ever made a .259 or .260 H&I sizing die set. At least I could never find one! I finally had a .257 Lyman reamed out to .2594 and it works real well in my .250 Sav Rem 700. I had mine done locally, but there is a guy by the name of Robert Stillwell, from somewhere in Texas that used to advertise in the "Handloader" and a few other mags. Perhaps someone has his current addy. The Cramer 55A is another 100g nominal 25 cal you might be able to locate.

[45 2.1]

Shuz-
Lyman did indeed make a .259" H&I die. I was hopeing someone had a custom one they didn't use anymore. I know about and have used Stillwell before. I've never seen a Cramer in my area either.

Beagle-
Thanks for the link.

[Shuz]

45 2.1---OK, I stand corrected! I just never did come across one!--Shuz

[45 2.1]

I came across one when young and dumb and had no 25 cal. rifles. It is listed in most of the older Lyman manuals also.