PDA

View Full Version : need plinking load for 6.5 Jap



corvette8n
09-12-2006, 04:30 PM
I have a bunch of 140gr gc lead bullets and am looking for a plinking load

I use 8.5gr of Unique for my 30-30 150gr gc.:castmine:

bruce drake
09-12-2006, 04:39 PM
I use 6gr of Red Dot over the 140gr GC for my Type 38 Arisaka

JEFF6555
12-25-2006, 02:52 AM
I use 10 grains of AP70N , equiv. of Unique , in a 6.5 x 55 Mauser. Works OK , gives 1375fps. Probably a bit light.

frugal
12-25-2006, 06:16 AM
I use 12.0 2400 with 266469, air cooled ww for type 44 Arisaka

Larry Gibson
12-25-2006, 12:59 PM
I use a 266455 129 gr bullet (WWs) and left as cast (.267"). GC is just seated and crimped the LLA is applied. Over 10 gr of Unique accuracy is ok and velocity is 1450 fps.

Larry Gibson