Sights for Buffalo Classic 45/70

[Kyfarmer]

Could someone recommend a good aperture sight for the 1871 Buffalo Classic. Mine has the Williams and it doesn/t have enough elevation adjustment and it cannot be adjusted without a screwdriver. I had rather not have the tang type but would like something like a ladder type sight that could be easily and repeatably adjusted for different ranges. Is there such a critter that doesn't cost more than the rifle?

[Urny]

If your sight is the Williams Guide, that is the aperature slides back and forth on an inclined plain, you can get a better sight in the Williams Foolproof. It is available direct from the NEF/H&R website, www.hr1871.com. I have one on each of my target model .38-55's and there is plenty of elevation adjustment in that application.

[Bubba w/a 45/70]

depending upon just how far out you plan on reaching, you could do it the way that I've done it...http://www.buffaloarms.com/browse.cfm/4,4915.htm

I just screwed it into the wrist after predrilling the holes. That works very well for me even out to 900 yards. This winter I plan on trying to come up with a metal tang type of system for myself. More than likely it will get put in between the stock and receiver, being held in place by the stock bolt.

[Bubba w/a 45/70]

Did it that way because those Williams just don't reach "up" far enough for me.:)

[Kyfarmer]

Bubba, do you have pics of your setup? Could you post them?

[RayinNH]

Kyfarmer, Brownells list one made by Smith Enterprise. It attaches to the existing holes in the barrel. It's a ladder type sight. Stock #851-000-045, that sells for $139.95...Ray

[Kyfarmer]

Thanks for all the replies. The Smith sight is about what I was looking for. Now if can find the money I'll be in business.

[HEAD0001]

Check out dixie gun works before you order, they have different ladders, Tom.:castmine: