Pan Lube Bullets

[LGS]

I read were this is used for Black Powder loads. Can it be use for lube on smokeless powder loads up 2200 fps. I have been using Liquid Alox. I don't like it for these loads. Works ok for handgun velocities.

[dragonrider]

You can use vertually any lube for pan lubing, You will find an excellent tutorial about it here
http://goatlipstips.cas-town.com/panlubing.html

[Lloyd Smale]

just make sure you clean the bases off on smokeless bullets or they will deaden the powder and you will get squibs.

[LGS]

Which lube is reccomended for this.

[klausg]

LGS- you can pan lube with whatever lube you feel like using, be it Felix's blend or some commercial stuff. If you are going commercial I would recommend some of lar 45's stuff, if for no other reason than price. I haven't managed to use up enough lube to buy any from him yet, but, from all I've read on this site I think his stuff may be the way to go; at least until I decide to make my own. Goatlips' site is what got me started, the only changes to his method that I do are I use the stovetop instead of the oven, (electric range) and the whack 'em with a knife handle didn't work well for me, or my knife handle. I use a heat gun, (blow dryer would work) to slightly heat up the 'cake' and push them out. The amount of heat depends on how soft/hard/sticky your lube is when set up. Hope this helps.

-Klaus

[LGS]

Does Lar 45 have a web site or other place to order his lube.

[klausg]

LGS- Here you go:

http://www.lsstuff.com/lube/

-Klaus