PDA

View Full Version : Cast .357 Catsneeze: Take 1.



Old Ironsights
09-03-2006, 10:37 PM
EDIT: .38sp cases loaded for a 20" Rossi .357 M92. You will make a mess if you shoot these through your revolver. Farina+Cylinder gap = splatter. C&B guys expect it, but it could be a suprise out of your S&W...

http://i5.photobucket.com/albums/y180/MrMisanthrope/IMG_4952.jpg

.357 sized 180gr Keith SWC, BHN-6, Alox lube, primed 38sp cases (primer unknown).
Loaded on Lee Hand Press, std crimp.

.3cc Lee Dipper Powder (aprox 5gr 3F vol.)
1.0cc Lee Dipper Farina for compressible filler.

2 loads each, shot across Chrony @ center hold POA @ 50yd sighting bull. No particular care taken for accuracy. Just line it up and clock it.

777: 505fps, 101ftlbs
4F: 480fps, 92ftlbs
3F: 459fps, 84ftlbs
Goex Pinnacle: 428fps, 73ftlbs
APP/Shockey’s Gold 401fps, 64ftlbs.

Oddly enough all 10 shots effectively made a 4” group 6” low. No ears needed. This will make an excellent "save your hearing" woods/squirrel/possum/coon load. While I didn’t bring my 96/22 to compare with these seemed quieter than what I remember of the heavy Aguila SSST 60gr loads and, while outdoors, only slightly louder than .22 Colibri’s fired in my concrete basement.

I think they would all take small critters rather nicely, so I loaded up 50 with Shockey. :mrgreen:
Not as much poop, but I gotta use it somehow. :roll:

Johnch
09-03-2006, 10:43 PM
Nice !!:drinks:

I have 10 lb of 777 for the muzzel loading shotgun .
I think I will try a few rounds with it .
I could shoot 1 lb for years .

Johnch

Old Ironsights
09-03-2006, 10:53 PM
I'm looking forward to doing this with the Lee CF358-180 group buy boolit...

StanDahl
09-03-2006, 11:08 PM
I don't know about 'catsneeze', but that boolit looks like it was lubed by being passed through a cat! :-D (It's been suggested that if you feed your cat the right chow, and slip 'em a few 'pills' a day, you can collect your lubed/sized bullets from the catbox.:shock:) That's some thick looking alox! Stan

Old Ironsights
09-03-2006, 11:18 PM
That's some thick looking alox! Stan
:oops: Wouldn't know. Didn't lube 'em. They came from the dealer that way.

The only .358 mould I currently have is a Lyman 358 158 Keith SWCGC with HP pin, and I havn't even ever lubed or resized those. No leading so far, but then I'm castin pure lead and shooting subsonic.