44 Mag Stuff [Archive] - Cast Boolits

StarMetal

05-12-2005, 07:41 PM

I have a set of Redding Deluxe Titanium dies for 44spcl/44mag. I have a Saeco double cavity mould 240 gr. Truncated nose gascheck bullet, two sizing dies one .429 the other .430, 100 rounds of new unfired Winchester brass, 100 rounds of Winchester only fired a few times brass, and a whole bunch of various makes used brass I picked up from here and there. I sold the 44 mag revolver and am out of the 44 business. I'll take $107 for the works and that includes shipping.

Joe

seagiant

05-14-2005, 05:34 AM

Hi Starmetal,
Are the sizing dies for a star luber?

Bass Ackward

05-14-2005, 06:58 AM

I have a set of Redding Deluxe Titanium dies for 44spcl/44mag. I have a Saeco double cavity mould 240 gr. Truncated nose gascheck bullet, two sizing dies one .429 the other .430, 100 rounds of new unfired Winchester brass, 100 rounds of Winchester only fired a few times brass, and a whole bunch of various makes used brass I picked up from here and there. I sold the 44 mag revolver and am out of the 44 business. I'll take $107 for the works and that includes shipping.

Joe

Joe,

Let's do some math. Midway has those dies for $64. The two sizing dies are $32. The new brass is $12. Forget the "only shot on Sundays" brass. That means that 64 + 32 + 12 = 108. That means the mold is free.

Since you don't want nothin for the mold, I'd be right proud to take that off your hands for that and I'll even pay the shippin. We got a deal?

:grin:

StarMetal

05-14-2005, 07:49 AM

Bass,

Yup, I done the math and I'm not out to give anyone the shaft when buying reloading equipment, because, well I'm a reloader and I like a good deal once in awhile. I really don't want to break up the set is why I'm offering it all together.

Joe

StarMetal

05-14-2005, 07:56 AM

I guess I should have mentioned that the sizing dies are for the lyman/RCBS type sizer.

Joe

Rrusse11

05-15-2005, 06:58 AM

Joe,
Don't need the other stuff, but I'd love the mould if ur willing to seperate.
Cheers,
Richard

Shuz

05-15-2005, 09:20 AM

Richard--I have a Saeco #439 DC mould I'm willing to part with. send me an e-mail at shuz44@hotmail.com if you're interested. --Shuz