jbunny
07-07-2010, 07:05 PM
second try at this as i lost the first attempt. the pic tell the whole story as i,m not retypeing like i did at my lost attempt. notice the pusher for holding the nose of the
boolit base up for a lee push through sizer. these targets are typical of the groups i got
with 13, 14, and 15 gr of unique between my martini and savage 44 mag. i have plans in my head for a slick boolit mould and a base turning lathe that i will be able
to change boolits without stoping the arbor. i plan on useing the rcbs collets as the boolit holder as u can change collets for any caliber and there cheap.
http://i138.photobucket.com/albums/q273/MOUICH/zinctargets.jpg
boolit base up for a lee push through sizer. these targets are typical of the groups i got
with 13, 14, and 15 gr of unique between my martini and savage 44 mag. i have plans in my head for a slick boolit mould and a base turning lathe that i will be able
to change boolits without stoping the arbor. i plan on useing the rcbs collets as the boolit holder as u can change collets for any caliber and there cheap.
http://i138.photobucket.com/albums/q273/MOUICH/zinctargets.jpg