Simple, home-made heater for sizing press

[rbstern]

I implemented an ultra-simple, low voltage setup using some resistors and a common, household power supply. I'm sure there are dozens of different ways to do this, and the guts from a bunch of household appliances could be adapted. My local climate doesn't require a lot of heat added to make the lube flow, so that eased the task.

Hope this is helpful to folks who might want to build their own lube heater.

http://www.gunsandbullets.com/articles/lubeheater.asp

[steveb]

Thanks for the link Rich:)

[rbstern]

Thanks for the link Rich:)

:drinks:

Steve, your blog is looking good. Nice write up on the Ranch Dog bullets.

[steveb]

Thanks Rich!:-D