Need A Little Help..........

[Rick459]

awhile back i traded some one here some .300 savage cases for 50 .30 cal cast lead bullets. i can't remember who it was as i have cleaned out my PM's. my request is simple. if you are reading this now i would like to know the mould that you used to cast the bullets in the case on the left. i did not weigh any of the bullets before i loaded them up. but as you can see the group on the left loaded up with 11.0grns. of Unique shows much promise. these were shot out of my Win Mod.70 30/06. the only mod done to the gun is a H.S. Precision stock which let's the barrel be Free-Floated.
Rick
http://i123.photobucket.com/albums/o301/rick4570/Picture124.jpg

[runfiverun]

looks like the rcbs 165 silhouette and the other looks like the rcbs-150-fngc.
if you show a pic of the whole boolit i'd bet you could save time by letting us just tell you what it is.

[deltaenterprizes]

Nice group! I have a 03 Springfield I thought about using to shoot cast bullets and that looks like a great load to start with.

[Rick459]

kbstenberg PM me as told me that they were cast from NOE moulds. and as you have said it appears to be a 165 grainer. i appreaciate your help. the squares on the target are 2" squares so when i shot the group on the left i was very supprised as this was the first try at shooting .30 cal. cast bullets from this gun. thanks for your help runfiverrun.
Rick