PDA

View Full Version : .358 GC rifle boolits 210 gr



Eagles6
03-11-2010, 12:13 AM
Came into possession of a box of .358 FP 210 gr boolits with gas check. They are .895 long with a crimp groove and 2 lube grooves. Obviously won't fit my revolver so I assume they are rifle boolits. Haven't been able to identify them through mold pictures. Any ideas?

stocker
03-11-2010, 12:17 PM
Rcbs 35-200fngc???

Eagles6
03-11-2010, 02:07 PM
Stocker,
Similar but these are 210 gr and don't have the forward crimp groove. It appears that Beartooth Bullets has the same one but doesn't have the mold designation.
Thanks

stocker
03-11-2010, 03:17 PM
My 35-200 actually drops bullets at about 210 grains from a w/w alloy. Is the crimp groove in yours further back than the RCBS? It sounds like a boolit made for the 35 Remington cartridge but may work well in other cartridges too.

Beerd
03-11-2010, 07:39 PM
can you post a picture?
..

Eagles6
03-24-2010, 08:59 PM
http://www.beartoothbullets.com/bulletselect/index.htm

Here's a link, looks just like the 210 gr. Apparently can be used in .357 mag or 35 Remington.

MT Gianni
03-24-2010, 11:45 PM
Veral Smiths 358 LFN.

Hank10
03-26-2010, 11:54 AM
I have a Saeco mold in that configuration. I shoot them in long range revolver competition by loading them in a 38 spl case. Depending on the length of your cylinder you may have to crimp over the front band even in a 38 case.
H10

Eagles6
04-19-2010, 10:02 PM
Thanks all for the info.