Does anyone have an RCBS JR3 reloading press?

[PatMarlin]

... or pics thereof I should say.

I'm trying to determin what the difference is in the JR3 primer feed arm verses the Rockchucker's primer feed arm system.

Reason is a customer is having trouble using his RCBS JR3 with the RCBS style ram ejector arm I've sent with the dies and I want to find the problem.

So if any members here would be so kind as to post a photo or 2 of the ram arm slot area and the press, I would be very greatful.

May be an all expense paid trip to SE Asia in the works as a thankyou as well.

[Lead Fred]

Went to SE asia twice. Once on Uncle Sam, Once to bring back my Bride.
Thats enough for one life time.

http://i865.photobucket.com/albums/ab211/stallhorn/jr3.jpg

My ugly portable press.

[PatMarlin]

Oooh Fred- that is ugly! ....:mrgreen:

Here's the pic of a Rockchucker with the ejector arm in it. Do you have the same pin hole for the stock primer arm under all that custom paint? ...:mrgreen:

http://www.patmarlins.com/rcbs.jpg

This one's pretty ugly too.

[Lead Fred]

The light spot is the hole, its about an inch lower than the Rockchucker.

If I put the bolt though that hole, it does not contact the ejector arm.
It needed to be longer by a tad

[PatMarlin]

OK- I see what happened.

I had a friend make those who has Rock Chucker, but he made them about 1/4" to short it looks like. I should have double checked that.

Is the length OK that reaches under the female die?

[Lead Fred]

It did, I throw it away, modified a primer arm to work :redneck:

[PatMarlin]

I need the correct lenght so I can correct this issue.

[PatMarlin]

It's OK, I'll get it narrowed down.

Figures this is the ONLY thing I had someone else make ...:roll:

[Lead Fred]

an Inch will do it.

I dont think you will run across a lot of JR2s or 3s

Aint been made since they landed on the moon :rolleyes: