PDA

View Full Version : 303 Loads



PAT303
06-16-2006, 12:23 AM
I just wanted to know if anyone had tried H322 or 10X in the 303. So far I've used 2400 and AR2207(you Yanks know it as 4198) and want to try something different. A bit more load density is what I'm after. Pat

Bad Ass Wallace
06-16-2006, 05:45 AM
I use 28gn 2206 with a 190gn .314 boolit from CBE

http://img.photobucket.com/albums/v152/BAWallace/Rifle_Cast.jpg
Close up of boolit (centre)

http://img.photobucket.com/albums/v152/BAWallace/303_cast.jpg
Assembled 303 rounds

PAT303
06-16-2006, 06:03 PM
Thanks for the reply. I've got CBE's 224 grain bullet and they drop .316 from the mold and shoot very well,I've been meaning to try 2206H which might be the ticket.

JeffinNZ
06-20-2006, 12:12 AM
PAT: I shoot 17gr of AR2205 (H4227 for you Yanks....[smilie=1: ) under a modified Lyman 311466 made to throw a 175gr truncated cone flat nose at .315 in WW. Similiar to BAW's 190gr.

Hey BAW: How does that 190gr of Jim's go? I have been looking at it on his site and have 2 of his BPCR .38 moulds. Does it feed. My converted 311466 is too blunt but for target shooting and single feeding shoots like a house on fire.

PAT303
06-20-2006, 12:38 AM
JeffinNZ You might want to try Jims 174 grainer,I was talking to him at a gun show not long ago and he designed that boolit to feed out of the mag. I'll try that load of yours thanks for reply PAT