pan lubing

[songdog33]

Howdy all: I am getting into casting after being away from shooting , reloading and casting for years. I bought some new moulds in .22, .30, .44 and .45 and would like to pan lube instead of using sticks in my lube sizer. I found some good recipes here and would like to try them. my question is, What do you guys use to cut the bullets from the lube (kake Cutter)?

[Down South]

Goatlips, one of our members has some great info on his site. You should be able to do a search here and come up with several good ideas. I used Goatlips method when I pan lubed.

http://goatlipstips.cas-town.com/panlubing.html

[runfiverun]

cutters can easily be made from golf club shafts too.

[prickett]

Here is a good video on pan lubing that answers your question:

http://www.youtube.com/watch?v=V_vYYoArHtE

[RU shooter]

Boolits dont always need to be cut from the lube especially rifle boolits ,What I do is place the boolits in the cake place it in my toaster oven and melt for 20+ min. after the lube solidifies again but is still luke warm I grab the nose with a pair of forcepts or long nose pliers and pull it straight up and out of the cake.I find I can lube 80-100 boolits alot faster this way.

[beagle]

Take a look at Castpis/articles by members/ Cast and the 310 tool.

I started out pan lubing 311291s about 50 years ago and sizing with a 310 tool. Pretty easy really but eventually, you'll say, there's got to be abetter way and spring for a lubricator/sizer./beagle