How many molds

[DragoonDrake]

I know this is like asking how many guns you own, but I was curious what the majority here owns in mold numbers.

Adam

[redgum]

9mm x 1
.38/357 x 8
.45 x 6
others (RB's etc) x 7

[Charlie Sometimes]

I didn't own so many, until I started hanging around on this forum!!!! :lol: :grin:
The number is rising weekly!

Got 30+

[jlchucker]

Enough for everything I've got--except 38/357 and 7mm08---but I'm working to correct that shortcoming.

[qajaq59]

Only 6, but I'm still looking for others.

[badgeredd]

I didn't own so many, until I started hanging around on this forum!!!! :lol: :grin:
The number is rising weekly!

Charlie you are among many I'd guess, When I started this forum I couldn't even spell "boolit" now I makes them.

Edd

P.S. I just did a talley last week and I was at over 75, and just added 2 more today!!!!!

[jimkim]

Let me see.....2 45's, 2 38's, 5 30's, 1 44... Holy cow! I own ten moulds! I didn't realize I had that many.

[azrednek]

Like guns, one can't have to many molds.

[MT Gianni]

Is this per diameter or total?

[canyon-ghost]

Every caliber should have at least two bullet molds, just for fun. Have way over a dozen.

[HORNET]

I just count them using troll numbers...one, two, many......I have no idea how many but not enough. There are a few specific ones I'm still looking for and there are always "Targets-of-Opportunity".

[Bret4207]

85 or 86 IIRC.

[Tazman1602]

As the saying seems to go a heckuva lot more than before I found this site..................

Art

[Catshooter]

Your poll is way too limiting! :)

My money is on 45 2.1. I don't think anybody is as sick as he is. I only have 75 or 80, he's got more than that in Lee six hole group buy moulds, I'm sure.


Cat

[10 ga]

Can/shall I include my fishing sinker, lure, net weight, and decoy anchor molds? How do you want them listed? Cronologically, grain wt., favorites... ?

[mooman76]

I lost track. Some wheres around 60.

[Jack Stanley]

Someone once said about guns , if you know how many you have it ain't enough . With that in mind , I don't think I know how many are in the dungeon . I have managed to buy a mold I didn't think I had one of only to find another just like it later . [smilie=l:

Jack

[Mike Venturino]

About 120 as of today but in the last few years I've sold off way more than that. Trying to cosolidate as age catches up to me.

MLV

[Patrick L]

Holy cow! I would have guessed about 10, but when I counted them I came up with 22!

[MtGun44]

Somewhere between 65 and 75, lost count and bought a few recently that aren't
in the list yet.

Bill

[RobS]

Well I've owned quite a few, but I guess I don't have as much $$$ as some as I always end up trading/selling before finding a new mold. With that I have 7 molds currently, waiting on one, but have had 30 or so different molds throughout my time casting.

[Shepherd2]

I'm down to around 50. Sold some I wasn't planning to use and some duplicates. Still have several I don't have guns for.

[iron mule]

i'm not sure how many total i have most are old more on the collectors type passed down thru the family from my great grandfather on down // as to mordern ones that i use to make boolits with i would guess about 40 and have about 5 more on order waiting for them to arrive/// plus i am always on the lookout for more old moulds and reloading tools to add so that i can pass them on to the burro
mule

[HeavyMetal]

Some things one doesn't need to know!

For example a quick 'head' count here in my bed room netted me 15 molds!

None of them 6 bangers!

I will now fight the urge to go count everything up for the rest of the evening.

[Charlie Sometimes]

I have managed to buy a mold I didn't think I had one of only to find another just like it later. [smilie=l:


All you guys like this need to get the duplicates out to the Swap & Sell and allow us less fortunate folks to beat ourselves silly getting to the bargains and help ourselves improve our condition (Conservative POV), or I could've said give them to those of us less fortunate to "spread the wealth around" so we can be like you (Liberal POV). Pick your poison! :lol: :razz:

[ghh3rd]

.38, .40, .44, .44 and varous sinker and jig molds. Of course there are the ingot molds too....

[Artful]

Over 40 not counting swaging core moulds

[cbrick]

Sadly only about 55 currently but always looking to fix this short comming.

I know of one forum member here that has over 700 moulds so the rest of us here are real light weight Johnny come latelys.

Rick

[jdgabbard]

9 Total.

All for 9mm/38/357...

[Lead Fred]

Three

two for the 45/70
One for the 30 cal

[Jbar4Ranch]

73

From a 45 grain .32 cal round ball to a 700 grain for the .500 S&W mag.

[jforwel]

Ten in my first year of casting. They go from .32 up to .45, all handgun with one Ranchdog .35 Rem.

[oltimer2]

Currently only have 5 molds, some scoundrel broke into my casting shed last winter and relieved me of 10 molds. DAN

[DragoonDrake]

You are right, my poll was too limiting. I only meant bullet molds; each one counted separately. I started this poll b/c my fiancee was getting a little upset that I have 29 molds. I said so let us see what everybody else does. I think I have some catching up to do. The only issue is that I don't know what else I need at this point.

[SciFiJim]

The only issue is that I don't know what else I need at this point.

Look for molds for guns that you want to get. Once you have the mold, you have more incentive to get the gun.

[HeavyMetal]

Why would the fiancee be concerned about the number of molds you have?

[MT Gianni]

You need double cavity's of your sc molds and 4 cav of your dc molds. You need a second one of hard to find obsolete ones that shoot so well in your guns you couldn't stand it if something happened to it. You need one with a different profile same weight to group just a little better.
Last count was over 15 35 cal molds and no duplicates, with a couple on the want list.

[Ekalb2000]

I tink I am loosin my mind.
I keep thinkin that I already answered one of these about how many molds we have!?!

[SciFiJim]

There are actually two threads. One with a poll and one without.

[10 ga]

45-2, 50-3, 58-2, 69-1, 30-1, muffin pan ingot-5, CASTBOOLITS ingot-1, fishing sinker 5, net weight 2, decoy anchors 3. Guess I'll go back and check the box. #25
10 ga

[xr650]

I have 57.

[StanDahl]

More than I thought!
37 total:
2-22 cal;
5-30 cal;
10-32-20/32 mag;
9-38/357;
7 round ball/black powder;
2-43 Spanish;
2-45-70
[smilie=w:

[AZ-Stew]

You need at least one for each bore diameter, more if handgun, muzzle loader and/or rifle share a bore diameter.

If you had asked me at the range, I'd have guessed 25-30. I just counted them here in the shop: 48 :holysheep. And I'm sure I "need" quite a few more. They range from .22 to .45 and include most common diameters. Some for handgun, some for rifle, some for ML. Some are multi-purpose.

I wish Hornady would grind up a new set of dies and produce some of the gas check diameters they've dropped over the last several years. I'd like to grab another 2-3K of the ones I'm short on --- I stopped writing mid-sentence and checked their web site -- Surprise! They're making most everything again! .22, .243, .25, 6.5, .270. 7mm/.284, .30, 8mm/.32, .338, .348, .35, .375, .416, .44, .45, .475 and .50! That covers all my needs and is a welcome sight. I guess the problem is that I tried to determine availability by checking Midway and Midsouth web sites. Neither carries all the available diameters. I guess I'll have to order directly (Ouch! $$).

Regards,

Stew

[Johnw...ski]

I have several .45 cal. rifle molds but lately I get a singe mold for each specific rifles characteristics.

[Crash_Corrigan]

I lost track many months ago. I know I have at least 8 Lee 6 bangers. I just got a MIHEC .44 6 banger that is a jewel of a mold. I bought 3 molds for my 50-90. I have two for my .223, three for my 6.5 x 55 Sweede, two for my 327 Federal Magnum, two for my .30 Carbine Ruger BH, 4 for my 9 MM's, one for my .380, a dozen or more in .38/357 and about 6 or so for my .45 acp and a handful for my 45 Colt. Then I have a few for my '29 Winch 94 in 30-30 and some more for my M-1 Garand and a Lee GB in .323. About 60 molds at last count.

It is a disease.

[DragoonDrake]

So I have noticed a certain trend. Once you get about 20 or so molds everything goes nuts and all of a sudden there are 50. So I have realized that I do 'need' a few more. A collar button 458, a stackable 44, and round ball mold for each one of my calibers. God this is an addiction.

Adam

[Jack Stanley]

All you guys like this need to get the duplicates out to the Swap & Sell and allow us less fortunate folks to beat ourselves silly getting to the bargains and help ourselves improve our condition (Conservative POV), or I could've said give them to those of us less fortunate to "spread the wealth around" so we can be like you (Liberal POV). Pick your poison! :lol: :razz:

Actually , I have tried to clean things up around here and some of the molds went at giveaway prices and some I have just given away . I have been working with one particular style recently , I have four molds from three different makers and they may get sold too . Maybe it's best to just say , I don't have a clue how many I have .

I would like to point out that bullet molds are a little like shoes , you don't wear workboots with a tux and oxfords don't go well in the duckblind but....... they both cover your feet . Some of us may be lucky enough to have and another may be like Emelda Marcos . Conservative ? liberal ? I'm clueless there too but I do know which end of the tube the round comes out [smilie=p:

Show your significant other how much you love them today ...... give them a bullet mold :idea:

:bigsmyl2:Jack

[Rockchucker]

Heres a question I've often wondered about. do you store your molds with the handles on or off? I've got 11 molds so far to date and all have handles attached to them, This takes up a lot of room in storage but never liked removing them. Plus the cost factor involved in buying handles for each mold.

[MT Gianni]

Rockchucker, I have around 50 Non-Lee 2 cavitys and only around 12 handles. They get swapped as needed.

[Hang Fire]

More than a few, but never enough.

http://i3.photobucket.com/albums/y92/TANSTAAFL-2/P1010001-7.jpg

[45-70 Chevroner]

I have sold in the past 3 weeks 12 molds on this forum. I still have 28 but that includes a number of Lee molds which I'm not sure they count because they are so inexpensive. I do like my Lee molds, as well as my Lyman and RCBS molds. I have never met a mold that I did not like! I'v had a few That I could not get to perform in a particular firearm though.

[45-70 Chevroner]

MLV: I know about the age thing and the total number I had until recently was 40. Of course I'm not in the bussiness that you are. I like your articals but I just can't get into the full auto thing. I pray for more stuff on BPRC. I don't shoot BPRC but we have a local SASS club and our long range shoot has a 535yd buffalo, plus verious other shorter distances. I think most of us shoot smokless.

[45-70 Chevroner]

Sorry about that but I pushed the key twice.

[largom]

Really had to go and count them. Rifle, pistol, and ML totals 96 plus 3 on order from NOE and a couple of GB's that have'nt bloomed yet.
Think it's time to sell some!

Larry

[dromia]

Seem to remember it was 60 odd last time I bothered to count them and I knew that wasn't all of them just what I could find and I 've bought a wheen or so since that.

Just stocking up for when I retire in a couple of months and I can sit down and get better acquainted with them all, I'll be cash poor but time rich. :D

Been stocking up on stuff over the past few years for this time a coming. :cbpour:

[Jack Stanley]

The H&G molds have their own handle for each block . All others get stored without a handle .

Jack

[Captain*Kirk]

Four, at this counting. But that's only for BP. I haven't started casting for cartridge yet!
Ask me next month......

[Landric]

I'm not sure, somewhere between 11 and 20. I'm pretty new at casting, I just started last summer, so I'm sure I will acquire more and more of them. At least they are cheaper than new guns (for the most part).

[Lucky Joe]

Need a couple for the .243 and perhaps another .30 cal. and one more for the .45/70. Then I think I'll be pretty well set.
http://i88.photobucket.com/albums/k168/Luckyjoe_01/MyMoulds001.jpg
http://i88.photobucket.com/albums/k168/Luckyjoe_01/MyMoulds002.jpg

[94Doug]

As the needs change, seems like so do the number of moulds. I don't think any of will ever be happy. Probably at least 30 right now on hand, but I think I have a couple on the way too.

Doug

[trk]

At the price of moulds today, I NEED to get down to about 30 moulds!

[rob45]

This poll is not fair. It forces us to admit a sickness without the means to confront it.

Sort of like going to an AA meeting where they have to admit the sickness and then offer support to get better.

Here, we have to admit our sickness and encourage each other to not only stay sick, but get even sicker.

:bigsmyl2::bigsmyl2::bigsmyl2:

[45 2.1]

Choices are way way way too low.....................

[shootinxd]

I just got started!This is CRAZY.

[qajaq59]

This is CRAZY. Yup, but it's fun.

[cumminsnut76]

I only have 2 but i'm just getting started. Woo HOO

[Char-Gar]

I have been casting for over 50 years and have 99% of the molds I have every bought. I have never cared to count them, but there are way over 100, perhaps 200. I really dont know, but there are many of them.

[Rooster]

I have six. Two 20mm cans and four .50 cans.[smilie=1:

[AZ-Stew]

Thanks, Frank. Now it's up to 49.

Regards,

Stew

[94Doug]

I just did a check on my inventory, and it is quite a bit larger than I admitted to in my earlier post....

Doug

[leftiye]

Not enough. EOS

[Shiloh]

Acquired two more. Still in the 11-20 category.

Shiloh

[Landric]

I counted mine yesterday. I have 18, which is low I know for a lot of folks here, but I've only been casting since the middle of 2009. I expect I'll be breaking the 20 mold mark soon, as I am really enjoying casting.

[wizard93]

I counted mine up and came up with 19. That's including the Ideal tong tool for the 40-82 WCF.

wizard93

[Beekeeper]

Dromia,
Watch out on the retirement thingy.
After many years of retirement I have found out it isn't what it was cut out to be.
After a couple of years it gets quite boring as you have done all the things you have wanted to do except shoot , so what do you do with the rest of your time.
All of a sudden you are too old and too far behind the times to get hired , (no matter what the rules, they descriminate)
Now all of a sudden retirement is very boring , Just ask me I know.



Jim

[jbunny]

differant strokes for diff folks. i've been retired 7 years and i wish i could,of
retired 40 years ago.
jb

[Dale53]

I have seventy plus...

Pitiful, just flat pitiful...

Well, I only need a couple more:bigsmyl2:

The IMPORTANT thing is that I am USING them:drinks:

Dale53

[torker]

I only have 6 for now but as mentioned by another member the number can, and will grow to astronomical. Just by hanging around this site and looking at the pictures. Thanks guys..

[Hank10]

I tried to post a pic here of my bullet board but don't think I did. I did get one on the album place. When i got so many that i couldn't keep up with them I got some cork board and a frame just like Hornady, Speer, etc. display their bullets and glued one of each mold onto the cork, starting with .22 and going up to .735.
Scratched the # of cavities on each bullet then later colored coded them to indicate # of cavities. Sure helped me keep track.
H10

[SciFiJim]

H10,
PLEASE work on getting that posted here. I would love to see it.
Jim

[Hank10]

Sci Fi, go to the top of the page and click on all albums, it should be there or if someone knows how to get a pic here, please, tell me.
H10

[hicard]

I already have a nice collection of moulds but with Miha and NOE, my collection is rapidly expanding.

[Trader Vic]

More than I need but not as many as I want...NRA PATRON LIFE MEMBER

[jimmeyjack]

5 and been casting for a whole 2 weeks:p what I win?:cbpour:

[chboats]

I don't know how many I have but I am sure it is well over 50. Don't let anyone tell you you can save money by shooting Boolits. It is true I do shoot a lot more and enjoy every minute of the process. But this forum is like being on drugs. it is habit forming and expensive. It has cost me a lot of money. It is full of "gottohaves" and worse yet "Ineeds"

jimmeyjack - you are hooked worse than I am. It took me almost a month to collect that many.

Happy casting
Carl

[frankenfab]

I probably have 30, but half of those are a very decent selection of large-bore revolver boolits, most of the molds made by Dan at Moutain Molds.

I have been casting big bullets so long, when I tried to cast some 358/200 WFNGC's the other day, I looked like a beginner. There's definately a difference, not in procedure, but in timing and flow adjustments.

This forum has got me wanting to branch off into aquiring smaller caliber molds, and 6 and more cavity molds, and old classic molds, etc., etc., etc.[smilie=6:

[mtgrs737]

More than I need but less than I want!!!

[sniper7369]

I have about 8 or 9, but I'm only casting handgun calibers at the moment. There are probably 5 or 6 rifle molds I'm thinking about getting.

[67bear]

Just counted 48. Might have a couple more. Since I found this website I've found a few more I really need.

[Springfield]

About 60 different moulds. I have only been casting about 6 years so I haven't had time to really get into buying them.

[Bert2368]

1 - .22

4 - .30

2 - .44

1 - .45

8 total. I am not worthy...

[Gun-adian]

More than fifty.....such a failure.

I'll get more, I promise!!!!!!

[armyrat1970]

Geez. Some of you guys dwarf me in comparision. Just added a new one to the family last week so I now stand at 6.
45ACP-2.
8MM-2.
38/357-1.
30Carbine-1.

[Thecyberguy]

Only 5. But, I am just starting up......so, maybe there is hope for me?
Have a good 'un, Guy

[justingrosche]

wheres the 100 + button?

[white eagle]

seem to keep the same #
just trade em off to try new designs alot

[PacMan]

I am at 12 and that is 6 more than i really need. It is fashionble to own a lot i know.
I have sold of a few in my short career that did not work out for various reasons.
Sure is easy to complicate things if your not real careful.

[plainsman456]

The sad thing I have some that I don't own anything to shoot them in and I have more on order.
I think it is one of those things that the next one will be the last/best.
NAH,there is always 1 more out there somewhere.

[casterofboolits]

I would have to do physical inventory that would take a couple days. Counting two cavity Magma's, somewhere around 150.

I used to have a casting business and haven't sold any moulds off yet.

[pls1911]

Before I can vote, I need to think a bit...
.45 pistol
two 4 cav 45 acp 230 gr RN
one 4 cav nei 230 bevel base RN
two RCBS 225 RN one 201KT
one 4 cav H&G 180 SWC
one, six cav 200 gr TC
one 6 cav 250 gr RNFP
two mihec SAA270 255 gr SWC
.38/357:
two four cav H&G 148 gr WC
one 4 cav lyman 158 SWC
Two 180 TCGC RCBS silhouette
One .35 cal RD FPTLGC
RD .35 cal FCGC
One .32 cal rifle> 2 cav 180 gr FPGC
.30-30:
one 2 cav Lyman 173 gr fpgc
one 2 cav lee 170 FPGC
two two cav165 gr RCBS sil Gc
Two four cav NOE / RD 165 FPGC
One four cav Saeco 150 gr fpGC (casts 160) (SWEET MOLD...$10)
45-70:
two , two cav RCBS 300gr FPGC
one , two cav RCBS 400gr FPGC
one, sinle cav 525 gr pb rcbs bpcr
one, two cav nei 440 gr FLAT nose soupcan like a wad cutter (Huge slap factor)
One Ranch Dog six cav 350gr FPGC
Three misc Lee trot line weights
one Single cav lyman slug mold
one 00 buckshot mold
Ok, I count 36 unless I forgot something, which is entirely likely

[pls1911]

Ooop.. forgot the 7mm-145-sil for the 7 TCU
That's 37... next worse affliction known to man, next to
Marlinitus...

[*Paladin*]

Man, I have mold envy. I only have 4 molds...

[biscot]

Only 6 molds - all for 9mm. I have three Lee six-bangers, and 3 magma 2-cavs for my Master Caster. Mostly I only use the Master Caster, and crank them out by the thousands. I like to keep it simple, although sometimes I'm tempted to get some other handgun-caliber molds and make some boolits to sell - most of the guys I know that shoot cast boolits don't cast their own, they buy them mail-order. Can't figure that out. They're missing half the fun.

[Hickory]

Man, I have mold envy. I only have 4 molds...

Don't become disheartened.[smilie=s:
Most of us started out with just one mould!

[gnoahhh]

I've probably owned over a hundred in my life, but right now I have around 20. I tend to unload the ones I seldom use or no longer have guns for. Moulds sitting gathering dust have no value to me, so every now and then I'll put them aside and sell them and use the money for other moulds (or beer)!

[hansumtoad]

OK. I counted them. 356

[midnight]

I suppose I have 60 or 70. I need to do another inventory soon and add in Miha's molds. That man will keep me in the poorhouse. I've got 2 more of his on the way. Now I've got NOE in the mix too. Thanks to this site I've discovered so many mold makers I may not buy an "off the shelf" mold again.

Bob

[Springfield]

I have at least this many, have to update the chorus line!

[zxcvbob]

I don't know, but 8 or 9 sounds about right. All of them are Lee, half 2's and half 6-bangers.

[Paulinski]

I got 8 and 9 more in queue at various group buys here...

[rintinglen]

Hi, my name is Rintinglen, and I'm an addict.... I think I have around 40, but I am not sure. I have .358 molds ranging from 75 grains up to 200 grains, I think about 11. I have 4 44 molds. 4 45 molds for pistol. 5 for the 45-70. 3 for my 38-55. 1 for a 32-40--(and I don't even own a gun in that caliber.) 7 for 32-20. 12 or so, 30 caliber molds. I sent a check out for another. I am an addict.

[Mossy Nugget]

Round ball and buffalo for 50 and 54 cal. BP. plus one round that is actually throwing .500 balls. Just got a Lee double gang 95gr. for Makarov. I am very new to casting for smokeless. Everything I know, I learnt' here. Oh! I guess that's six altogether.... There will be a Lyman #314299 or Lee 312-155-2R or perhaps in 165 grains as soon as I am done sluggin' the bore today.

[adrians]

i spend more time deciding what mold to use than i do casting ,thats kinda backwards aint it ,,oh well .:twisted::???::evil:

[DragoonDrake]

Adrians, I have done the same thing now. When I started this poll I had 26 molds. I now have nearly 100. I have finally started to sell them, because I have some I just don't know what I am going to do with them.
Adam

[Fredx10sen]

71 Exactly

[shotstring]

I think a family can safely get by with 1 or 2 jello molds, but more bullet molds than that are required for any family in my opinion.

[Ammosmith]

http://i819.photobucket.com/albums/zz112/ammosmithphotos/MoldCollection002.jpg

[looseprojectile]

I got to thinking and I can't imagine a gun that I can't make a boolit for.
Maybe .17 cal or 600 nitro or larger. Oh I do have a .58 minie. And the .690"rb.
I have at least one mould for each gun, naturally.
At this point I think I have all I need.
I'd like to have a 400 grain .408".
And Ranch Dogs 170 grain 360".
A decent 8mm 200 grain.
A 120 grain .257". and so on and on and on.

Anyone want to talk swaging dies? :popcorn:

Life is good

[bearcove]

30+ is close. I sold a bunch of molds on ebay and bought nice custom stuff.

Thats down from 50 or so. Not counting fishing stuff!

[iwottopq]

Hello to all.
I have:
- 9 m/m 125 grs RN 2 Cav
- 9 m/m 125 grs TC 2 Cav
- .38 148 grs SWC 2 Cav
- 6,5 160 grs 2 Cav
- .30 160 grs 1 Cav
- .22 55 grs 2 Cav
Ciao
Nino

[supersonic]

2 because I'm just starting out.

-.308
-.45

[NoZombies]

I keep an excel spreadsheet with mold info and notes. I update it about once a month with new acquisitions and dispositions.

Right now I have 48, but I've sold 31 in the last 6 weeks. I plan to sell some more and continue to focus on getting "what I want" instead of just what's available.

I fully expect to settle happily with something around 150 molds, and then just add to that number as I see something I've wanted but couldn't find, or I develop a new "need" with the arrival of a new project. I also expect it to take several years to acquire everything I'm looking for now.

For example, I currently have 10 .32 caliber molds, without counting duplicates, and I can think of at least 3 more that I "need" (Of course, the .32 is an affliction unto itself)

[michiganvet]

Haven't counted in 20-30 years, occasionally get more, added 7 this week. Have eyes on Lee 6-cav .358 tumble lube wc. My old wc is a 1-cav Lyman. I worked overtime jobs away from home for years and often sent things home when I was far away.

[Rangefinder]

Like so many others, I started with just one--I got a Lyman for the specific purpose of putting my .32 Win Spl back in the game on the cheap. Next thing I know somebody sprinkled my mold and little box of WW's with rabbit dust. Now my lead supply is up somewhere over a ton in various states of ingots to raw/unsmelted and I really can't count all my molds off the top of my head without going out to the shop and looking. How did that happen??? Oh yah, I remember--I started hanging around all of you on a regular basis... ;)

[1Shirt]

It's sort of an addiction, like booze or drugs, or maybe sex. But won't hurt you like booze or drugs.
1Shirt!:coffeecom

[speederino]

Just getting my start in casting here. Two molds to my name. I see them accumulating over time....

[cbrick]

It's sort of an addiction, like booze or drugs, or maybe sex. But won't hurt you like booze or drugs.
1Shirt!:coffeecom

And not nearly as expensive as sex. :shock:

Rick

[Fredx10sen]

Added five more molds to the collection from Midway yesterday. Now just need to clean them and fire up the melting pots. :Luvcastboolits:

[MikeS]

My mould count changes. I recently sold off a bunch of 2 cavity moulds, but replaced them with 4,6, and an 8 cavity mould! Now casting with a single or dual cavity mould just seems like so much work, compared to the multi cavity moulds that make a bunch of boolits real quick! Of course the other side to that coin is that I now have enough of the boolits from that 8 cavity mould that I probably won't need to use it again for a year or more! Or I can just go ahead, and start shooting a whole lot more than I do now! :)

[Hank10]

This many, about 150 or so, making this bullet board has been a great help to remember what molds I have.
http://i367.photobucket.com/albums/oo111/baymuoibay/P1000426.jpg

[Johnk454]

Somewhere around 100. Need a fresh inventory, tho!

[Bulletlube]

Well over 100

[hansumtoad]

For any of you that are contemplating thinning down your collection, these are on my "hit list" to buy. All are Lyman/Ideal. Dont be sahful if you have one or more. Shoot me a PM and name your price. Lets do some biz.....

225036 40 46 54 60 69gr

225209

225487

228035

244503

257021

257306

263314

294380

299152

299153

299155

311001

311002

311010

311023

311206

311224

311240

311259

311274

311281

311282

311288

311331

311333

311351

311397

311419 HP

313055

313056

313057

313260

313307

313493

319049

321115 125

321265

321298

323061

323236

328371

338337

350293

354433

358070

358071

358073

358097

358160

358238

358313

358339

358363

358385

358394

375078

375080

375164

375272

375355

386176

403092

403095

403171

403172

410214 101, 141, 181

412174

412328

412338

415175

415179

419180

419182

423173

427099

427100

429104

429105

429184

429422

436218

446109

446187 330 400

454067

454148

454485

457107

457126

457127

457131

457132 417 475

457235

457474

465451

470216 230 285 342 368

533044

538146 524

575387


Thanks for your consideration !!

[Sonnypie]

I have...... 3

I only reload for two calibers, currently.
I gave away most of my firearms to the kids.

700 molds??? That is sick!

[Green Frog]

I honestly don't know how many I have in total, because I only pay attention to the few I am using at any given time. I do know that I started buying up all the different moulds I could find for the .32 cal rifle bullets I use in my .32-40 and ended up with with about 10 for it. Kinda like size, I guess, it's not the number you have but what you do with the ones you have! :D

Froggie

[Cannoneer]

These are the molds I know I have, I just do not have the correct Mfr's ID number for them, so I'll give you their caliber, weight, and nose profile.

1ea - Lee .309 - 200 - RNGC
1ea - Lyman .311 - 200 - RNGC
1ea - Lyman .45 - 500 - RN
1ea - Lyman .45 - 300 - RFN
1ea - RCBS .45 - 350 - RFN
1ea - Rapine .45 - 405 - RNHB
1ea - Lee .45 - 405 - RNFP
1ea - NEI .45 -385 - RNGC
1ea - Lyman .50 - 350 - RNFP
2ea - Lee .452-255-RFN
1ea - Lyman - .45 - 250 - RNFP
1ea - RCBS .45 - 250 - RN
1ea - NEI .45 - 230 - TC
1 ea - PCM .45 - 185 - WC
1ea - Lyman .454 - 250 - KSWC
1ea - Lyman .452 - 230 - GC SWC
1ea - Lyman .429 - 240 - RNFP
1ea - RCBS .429 - 205 - RNFP
1ea - Lee .40 - 175 - TC/TL
:lovebooli :cbpour:

[WHITETAIL]

I have over 30 moulds.:Fire:
And there are 2 on order from NOE.
Well 1 paid for, the other the check is in the snail mail.:cast_boolits:

[209jones]

55gr .22 Lyman
130gr 7mm Lee
150gr 7mm NEI
90gr .301 LBT
165gr 311 LBT
170gr 311 Lyman
209gr .322 Jones
400gr .410Saeco
320gr .412 LBT
400gr .412 LBT

I've had a lot of fun with all of them.

[DragoonDrake]

I have to wonder how many of us have answered this poll and would now be in a different category. I know I would. I also now know that I was too limiting on this poll.

[armoredman]

I'm up to 6 molds now, started casting a couple of years ago. Guess that's Ok for a beginner.

[Gisli]

I feel like a complete newb with only 3 molds (4th in the mail), but then I just cast for my .243 and 30-30.

Gisli

[dodgyrog]

I've lost count - well over 100 of the things! :lovebooli

[Ilwil]

I've got 57 of all types, #58 is in the mail.

[Moonman]

WOW, some people do have some molds, LOTS OF MOLDS!!!!

[cbrick]

On January 25, 2010 in post #28 I said 55.

Must have been a pretty good year and a half, it's now over 70.

Rick

[OnHoPr]

I have seven moulds and thinking of more.

.490 rb; .311 rb; .30 180gr; .50 440gr; .44 310gr; .44 240gr (258gr); lee 1oz slug

Casting can be mystically rewarding.

[Blackwater]

This thread got me to stop and think, and I currently load for 7 bore diameters in rifle, and 6 in pistol. That's a baker's dozen, and that's without differentiating .357 from 9mm, etc. I'm at or over 50 moulds now. Variety's the spice of life, after all, right?

[frkelly74]

It tends to vary from time to time but is trending upward.

[metweezer]

How do you differentiate one from the other?

[cbrick]

This thread got me to stop and think, and I currently load for 7 bore diameters in rifle, and 6 in pistol. That's a baker's dozen, and that's without differentiating .357 from 9mm, etc. I'm at or over 50 moulds now. Variety's the spice of life, after all, right?

Options . . . A man just has to have options and the more the merrier! :mrgreen:

Rick

[Lefty SRH]

I have 2, soon to be 3.

[Bullet Caster]

Let's see......Um......I think I can count them on one hand.....Um....how about 2 moulds--one for my 9 and one for my .45 Colt clone. I can't believe some of you have over 100 moulds. I would imagine that had I started casting at an earlier age, I'd probably have quite a few by now too. Where in the world do you get the time to use 100 moulds? You should probably be in the boolit business, selling boolits all over the place. I think I'm gonna be sick........... BC

[buyobuyo]

I try to keep it simple. Only 1 per cartridge. 1 for 9mm, which I could use in .38/.357 if I wanted to give it a try; 1 for .38/.357; 1 for .45 ACP; 1 for .30/30; and 1 for .30-06/.308.

5 total, but I planning on adding one for my .50 cal muzzle loader. I just need to figure out what it likes.

[Grandpas50AE]

I have 8, but another will be coming when one of the group buys gets going. Right now I have a Lyman single cavity PB .458 500 gr. for 45/70, a Lyman single for .458 GC for the .458 Mag., Lyman 2C PB .38 170gr.SWC, RCBS 2C GC .44 240gr., Lyman 4C .44 215gr SWC, Lyman 429244 in 4C, Lyman 4C in .45 200gr. SWC BB, and my newest I haven't had a chance to try out yet is Accurate 35-140S in 4C Brass. The one I'm getting in the group buy is Miha rerun of the Cramer 4C Brass 429244 with a few pin options.

[jim 44-40]

Wife says one to many, No just kidding. Not as many as I would like to have.But the 11 I use are great molds

[Valley Forge]

As of today, I count 33 moulds in hand and waiting for 2 more in group buys to complete. But the day ain't over yet!

[Mal Paso]

I have only 5 molds but they are all variations of the Keith in 44. The One True Caliber.

Friends threaten caliber intervention but I'm quite happy here. I am somewhere between 30 and 40,000 cast and shot. Lost track of the number of Kegs of 2400. Finally getting to be a decent shot.

It's Unloading Day. Gotta run. Range opens at 9am and I have 150 left to load.

[Loki610]

Since I started 2 months ago I'm nearly at 10 including the old civil war era mold I found.
6 for the .38 including the 000 buck mold
2 for the 30-30
1 for a unknown .46cal muzzleloading rifle

[50&10x]

I have so many that at Christmas time I painted them different colors and started hanging them on the tree. I had to stop doing that because the tree fell over..

[Vegas Vince]

Have 32 on the bench right now. That is not including the ones I sold, lost, or gave away over the last 45 years.

[Texantothecore]

I just started casting and I have two, .457 hb and .457 roundball. Next buy will be a 535 grn Postell and then the .458 collar button.

I plan on getting .452 in various flavors and weights for the acp as well as the next .45 Long Colt revolver.

[sledgehammer001]

22 Bator x1
6.5 Cruise x1
30 Lee x2
30 Herters x1
312 Lee x1
357 Lee x1
41 Lee x1
45 Lee x1
50 Lee BP x1
12 ga. Lee x1
00 Lee x1
Not a lot by some standards, but what I HAVE to have, J

[MikeS]

When I first responded to this poll I had about 12 moulds I think. Now I just checked, and the number has grown to 31, and I'm getting another one in the mail tomorrow (I hope). Originally when I assembled my new workbench I had used the 2 lower drawers to hold my moulds, now I have both of them full, and had to use another shelf in the closet to hold some moulds (I keep my 'good' moulds in the drawers, and my Lee moulds in the closet!).

I'm running out of space for all these moulds, and might have to resort to taking some of them off their handles to save space, something I would rather not do, I like having each mould with it's own set of handles.

[Gunslinger1911]

More than I need, less than I want !

[Alley Cat]

Just got my second!

[no34570]

Each rifle has at least 5 moulds for it,maybe more for my 444 and 45/70,oh and 303's

[DragoonDrake]

I still have a hard time believing the spread on this. Talk about a reverse bell curve

[SciFiJim]

I still have a hard time believing the spread on this. Talk about a reverse bell curve

I think it boils down to 20 or under = beginner or lots more that 30 = old time caster. The poll is a still picture of something in motion. It shows a lot of new casters.

[slide]

I have three but I am just getting started!

[Dschuttig]

I collect old Ideal/Lyman designs, so I guess ihave quite a few. Lyman/Ideal almost 170, Rcbs 9, Lee 15, a few cramers/saeco and several group buy molds./ dan

[fishin_bum]

let me count .54rb, .50rb, .44rb, 45rb, 32rb, 36rb, .358swc, .358wc, .308 x 4, .309 x2, .224fn, 45-70, .40swc 6cav, I guess that's 17 I better buy more I feel I need more

[Tar Heel]

I just added them up. WAY TOO MANY??

[Tar Heel]

It would be nice to see a chart too with type of mold metal (AL, BR, IR) and/or Custom or Commercial.

[jlm223]

Well as of yesterday I am the proud owner of 3 Lee mold's, have not used them yet, going too real soon.

[Junior1942]

Here's my inventory:

1 Hoch
2 Lyman
5 RCBS
32 Lee

[Reload3006]

lol I will have enough when I have one more... got 2 kinda on order (group buys)
one on its way
10 others.
Do swage dies count too? OMG

[AndyC]

Only 2, but both are great quality - H&G #68 dual-cavity .45acp 200gr SWC annnnnnnnnnnd.... a Mihec 4brass 4-cavity .45acp 200gr SWC.

(yup, Im a .45 addict).

[southpaw]

Do swage dies count too? OMG

I have been trying to stay out of that area. I am having enough trouble paying for the group buys that I am in :shock:. I would like to get into it by the end of this year if the funds allow for it. I'll just have to eat more ramen noodles and pbj sandwiches.

Jerry Jr.

[Reload3006]

I have been trying to stay out of that area. I am having enough trouble paying for the group buys that I am in :shock:. I would like to get into it by the end of this year if the funds allow for it. I'll just have to eat more ramen noodles and pbj sandwiches.

Jerry Jr.

LMAO They say the difference between men and boys are the price of thier toys and he who dies with the most wins.
The water is fine jump on in. I didn't go the reloading press route so Hey I got some money tied up. But you cant take it with you may as well play with it while your here. If you dont your wife or kids will spend it of stuff you wouldnt approve of.

[Rockchucker]

I'm gonna stop after one more,Woops thats beer.

[Casper29]

I have 4/45s - 3/38-357 - 2/9mm - 1 380 - 1/7mm - 1/30cal - 1/44 two round balls 1 3 cavity with three differnt bullets 1/257 and a few other that I have not used in a long while so I will have to look.

[youngda9]

Own 2. Lee 157 grain 357 and an Accurate Molds 431-260V.

[yobohadi]

Only 11 but I have plans for more. :bigsmyl2:

How do you guys with 50+ molds keep track of your inventory so you don't have the problem of buying duplicate molds unintentionally?

[cabezaverde]

Only 11 but I have plans for more. :bigsmyl2:

How do you guys with 50+ molds keep track of your inventory so you don't have the problem of buying duplicate molds unintentionally?

Cant always. I have 3 358156 molds.

[skimmerhead]

close to 60 and waiting on 6 gb molds, all handgun molds. then i have to start with the rifle molds. i'm gonna go broke at this rate.

skimmerhead:lovebooli

[Roosters]

I can see right now to old to catch up with you guys. I have one and it just got it’s first lead today.

[SciFiJim]

I can see right now to old to catch up with you guys. I have one and it just got it’s first lead today.

Roosters, It's not a contest. It's for the joy of pouring melted lead. Remember your first cast today. it will only get better (and sometimes more frustrating). :drinks:

[Roosters]

Ya got a thread started now asking about the world of stuf I don't know yet..
http://castboolits.gunloads.com/showthread.php?p=1663347#post1663347

[Coconino]

About as many (12) as I have time for. Hope the retirement funds will allow for a few more to help fill up that "free" time.

[KaliforniaRebel]

Lee 311-93-1R for 7.62x25 Tokarev sized to .311
Lee 312-155-2R for Yugo Zatstava M59/66 (Which I refuse to call an SKS for the sake of all Californians. See the Robert-Roos list "Named Weapons banned" line 11 for why... )
Lee C312-185-1R For Mosin M91/30
Lee 365-95-1R for CZ 82. This one has been a little troublesome. Still playing with the powders. I think it's the polygonal rifling more then anything.

[pmer]

I have 9 molds from 32 cal to 458 and one has 2 different cavaties.

I just picked up a 4 cav 358432 and poured 575 nice ones.

[pmer]

I can see right now to old to catch up with you guys. I have one and it just got it’s first lead today.

I remember my first castings just a few years ago. I showed them off at my gun shop and took pictures. Yeah I had the fever pretty bad and still have a lot to learn :p

[1bluehorse]

I think I'm down to 9 or 10. I only cast for 4 calibers so all I look for is a couple in different weights for each caliber that will shoot well. I have a tendency to just cast with the one that works the best and meets my needs. Not saying I wouldn't try a new one, but pretty happy with the ones I have. I don't need a drawer full of molds I never use.

[Jim Flinchbaugh]

I'm just a rookie, 5 molds on the shelf and 2 on the group buys waiting, & waiting, & waiting :D

[rmark]

My problem is I finding a mould at a good price then having to buy a gun to go with it.

[gwpercle]

I had to sit down and think about how many. Best I can figure is 14 , but I would like to have several more. Trouble is a lack of disposable income on my part and outrageous prices sellers are asking , even for used moulds. I looked at a group buy yesterday but the cost of a 2 cavity mould, handles and shipping was still out of my reach. I just keep looking and every now and then find a mould at a affordable price. The fun is in the hunt.

gary

[Tom Trevor]

I would have to go in the den and shop to count but at least a hundred.Old timer in our club collected everything and when he passed the widow sold the guns and asked me to just get the other JUNK out of his shop.

[David Bachelder]

I have three. All are .358 for my Henry rifle. 1 at 124 grains X 6, 1 at 58 grains X 4 and a hollow point mold X 2 which I have not used yet.

[dancingbear41]

I have over 100. Many get used and I like to have the selection. Now that pistol shooting is has gone I have a number of moulds that are a little redundant.

[latesvak]

well im only a year into casting but i fell in head first. i only cast for .357,9 and 40 right noe but soon to come is 45acp and 233.


latesvak

[Ramslammer]

Lots and lots
But who cares i own some for guns I DON'T own and never will. "My name is Juddy and I have a problem" lol
Juddy

[Hurricane]

A wise caster would have one mold for each caliber (30-30, 308, 30-06 all could get along fine on one mold, for example 311041) or two if you had a rifle and handgun in the same caliber (35 Remington, 38/357 would have a 200 gr rifle mold and a 158gr handgun mold). On the other hand, how many of us are wise enough to pick the best mold first.

[NoZombies]

Awe heck, I think I'm over 20 molds just for the 32's at this point. I seem to buy more whenever I get the chance.

Sickness? maybe, but it's still cheaper than therapy, and a heck of a lot more fun.

[DRNurse1]

Neat Question. I have 9 right now, but two more on order.

[guidogoose]

Ok, I have to ask. Why in the world would someone need more than one mold for each caliber?

[Jim]

Oh Lord, I've got molds for calibers I don't think they make guns for anymore. I've got molds that I bought and have no idea when and molds that I have no idea where they came from.

[jameslovesjammie]

If you would have asked me, I would have probably said 15-16, so I counted them. I'm at 36+2 on order. Wow. I would have never guessed that.

[frnkeore]

I'm a mold horder, please don't send help or turm me in :) I have over 80 molds Bought my first in '82) about 25% pistol and round ball, the rest rifle molds from 22 - 50 cal. I don't even have a 50.

Frank

[alamogunr]

Ok, I have to ask. Why in the world would someone need more than one mold for each caliber?

I'm sure others can answer better than I can, but my first thought is:
What does need have to do with it?

1. Multiple guns in a single caliber.
2. Multiple designs in a single caliber.

I'm sure there are others.

[Aunegl]

I recently bought a gently used RCBS .30-165 silh. that needed a good home.

[Baryngyl]

I have the 30 listed below plus a few others that are not yet typed on my list, got to add them once I get them unpacked.

.311 RB
.330 RB
.360 RB
.380 RB
.433 RB
.451 RB
.457 RB
.490 RB
.530 RB
.562 RB
.575 RB
.600 RB
.690 RB

.450 Conical Cap & Ball 1-Cav . 450-200-1R
.50 R.E.A.L. 1-Cav .50-250
.450 Improved Minie 1-Cav .450-250M
.450 Improved Minie 1-Cav .450-294M
.58 Improved Minie 1-Cav .575-472M
.356 2-cav 356-125-2R
.358 2-cav C358-158SWC
7mm 1-Cav C285-130-R
.308 1-Cav C309-180-R
.44 2-cav C429-240-SWC
.44 2-cav C430-310-RF
.458 2-cav C457-500-F
.457 1-cav 457-405-F
.458 2-cav 457-340-F
.456 1-cav 456-220-1R
Lee 1-Cavity Shotshell Slug Bullet Mold 12 Gauge 1 oz
00 Buck 18-Cav


Michael Grace

[rmatchell]

The more I get into this the deeper i want to go. 15 molds as of now and I keep seeing others that I want but better slow down the wife might kill me.

[Jeff.L]

Thought I had around 20 , Wrong 36:mrgreen:

[Texinoz]

Anyone have a Lyman 446187 mold 470gn heavy version that they want to sell?
I am desperate for one. Apologies if this is not the right place for posting this.
Mark

[sharpshooter3040]

My Dad cast for over 50 years until he passed away, I have been casting as long as I could shoot, at age 6 and now I am passed the 1/2 century mark. Counting the collection from my dad plus mine (still growing). I am over 250 moulds and still don't have enough. Just bought one from Swede last week, I think this is an illness that will follow me to the grave....BTW the moulds go with me when I leave.

[south.texas.dead.I]

My Dad cast for over 50 years until he passed away, I have been casting as long as I could shoot, at age 6 and now I am passed the 1/2 century mark. Counting the collection from my dad plus mine (still growing). I am over 250 moulds and still don't have enough. Just bought one from Swede last week, I think this is an illness that will follow me to the grave....BTW the moulds go with me when I leave.
Picture to prove it! Thats an intense collection...I have 3

[SciFiJim]

I don't remember what my selection was when I first posted in this thread. I now have 24.

As an aside, I have been very tired and not interested in much lately because of working MAJOR overtime. Tonight I pulled out my box of molds and was opening them and just looking at the cavities. Like a kid looking at his baseball card collection. It perked me up and made me feel better.

[herbie]

just started reloading......i only got 1 :violin:lee 6 cav .452 228RN mold pathetic i know but i have to start somewhere.

[alamogunr]

just started reloading......i only got 1 :violin:lee 6 cav .452 228RN mold pathetic i know but i have to start somewhere.

Hey! I started out with the 2 cavity TL version of the .45 round nose. Now I've got over 75 molds(haven't counted since I posted on this poll) and am waiting for 2 or 3 more GB's. I have to admit that I have several that I've never used.

Be careful. They are worse than rabbits.

[dancingbear41]

I bought another mould yesterday, so now my total is up to 119. Too many??

[NoZombies]

Ok, I have to ask. Why in the world would someone need more than one mold for each caliber?

I don't "need" more than one gun per caliber either, but that's never stopped me!

I need to update my list. I think I've gotten about 20 molds since the last time I even had the chance to cast...

[dnmccoy]

None yet...was looking at a mp mold but it looks like it could take a year to get!

[Baryngyl]

just started reloading......i only got 1 :violin:lee 6 cav .452 228RN mold pathetic i know but i have to start somewhere.

When I started I too started with just 1 (.308 1-Cav) mould and it was about 4 - 5 years I think before I got any more.

I picked up 5 or 6 (used but good) one time at the gun store for something like $5.00 each by buying them all, over 1/2 of them were for guns I did not own (yet), still do not own guns for some of them.

Michael Grace

[tward]

21 mold so far! Tim

[HATCH]

I have 11 molds for the master caster. At least 3 xs that amount for hand casting.
Gonna thin the hand cast down to just 5 or 6 essential molds in case the machine is broken or hell as broken loose and got to go total old school

sent from my mobile.

[pastor]

i have 3 all are lee 6 cavity
1- 45acp 230 rn
1-45acp 200 swc
1- 38/357 148 swc

[Bodine]

I dont dare count as my wife would find out and kill me, but I have 28 LBT and 3 times that in Lee, RCBS, Ideal, Lyman, Saeco, Cramer, H&G, etc... 12 ammo cans (20mm) full..

Sick arent I??

[bearstopper]

I currently have 8 but that number is sure to increase.

[fatnhappy]

I have 15 or so in .30 cal alone.

[captain-03]

More now than when I answered the Poll question!! .... and they keep arriving at my house ...

[Crashbox]

I was unable to respond to the poll as I have less than one, but Lyman #412263 should be in my possession in less than a week. Will likely get one or more .38/.357 moulds and a 6.5-ish once I slug the bore of my Arisaka...

While I'm at it, I just wanted to say THANK YOU to y'all for sharing your knowledge and wisdom here as I am a total noob at casting projectiles.

[Rangefinder]

The darn things share genetics with rabbits... I swear it! I think I voted in the 11-20 category a while back. I think I'm in the next group now... When I'm not looking, something just "appears"! Ask my wife--I tell her regularly! :D

[Wal']

Just bought another two :confused: only because they were listed as 70's unknown brand/manufacture.

Haven't arrived as yet............anyone identify or know where these were built..........they're brass.



5458154582



54584

[mdevlin53]

I used to think i had about a dozen molds untill today. I ordered a mold from Tom at Accurate Molds. Now i have one mold and a bunch of blocks that look like molds. make

[Jim Flinchbaugh]

I'm just a rookie, 5 molds on the shelf and 2 on the group buys waiting, & waiting, & waiting :D

Since this post in march I've grown to 8 in the drawer and 2 on the group buys,
Someone here is contagious and most of us caught it!

[Super Sneaky Steve]

14 moulds, 2 calibers .452 and .378. Lee makes it easy to collect em' all! :D

[Coonazz]

8 molds to date. 5 calibers and 1 12 ga. slug

[Buzz64]

7 on hand with 3 in the group buys due in........

[groundsclown]

only 5 so far but as soon as midway gets some 4 bangers in that I'm looking for I'll add 3 more

[labradigger1]

one for the 32 s&w
one 69 caliber minnie ball
one 490 rb
one for 45 colt
3 for 38/357
one for 44 mag
one for 30-30
one for 45-70

[Shedhunter]

More than I need but not as many as I want!

[Sgtonory]

Only 2 for me but just started 2 weeks ago. If only i could find more molds in stock.

[hansumtoad]

My name is Bob and I'm an addict. Over 400.

[Tazman1602]

Hey Sarge,

www.accuratemolds.com

Tom will have you what you want in three weeks or so. VERY nice mold built to order.

Art

PS -- welcome to the addiction.......................


Only 2 for me but just started 2 weeks ago. If only i could find more molds in stock.

[BBQJOE]

My name is Bob and I'm an addict. Over 400.
You sir, are beyond rehabilitation. :-)

[zidave]

Two!
One for my 40 and one for the wifey's 380.

[BBQJOE]

Four.
1 for .44
3 for 9mm, 38

[pworley1]

30+, seems to always be one less than I need.

[Colohunter]

Just one from Christmas for me. But I'm already planning on what the next 3-5 mold sets will be.

[sidecarmike]

You guys have got me feeling inadequate. Only six of them.

2, 6 holers a 451-200 SWC and a 356-124RN
1 4 holer 358-158 SWC
3 2 hole 312-160, 452-200, 356-124TC