Lee handles on Saeco mould?

[tomf52]

Will the Lee six hole handles fit on Saeco two or four hole moulds? Thanks for any help here.

[MT Gianni]

Yes but they need to be redrilled and I don't recall now whether they need to be thinned or shimmed. I did one pair and labelled them for Saeco's.

[BCall]

I got a couple of Saeco molds and had no handles, so I tried a set of Lee's. I had a new set here that fit perfectly in the slot, drilled the hole out a little larger and they work perfectly. No extra work needed. Billy

[StanDahl]

I'll third that. The drilled out Lee's will still work fine with the Lee 6 cavity mould too.

[jameslovesjammie]

Yup...drill them out with a 3/16" bit and they work like a Champ!

http://i26.photobucket.com/albums/c129/jameslovesjammie/gun%20stuff/Casting%20Stuff/P1010948.jpg