Lachmiller Lube sizer parts help

[nitroproof]

My ancient Lachmiller lube sizer "nut/o-ring thingie" finally gave up the ghost. The rubber o-ring tore allowing lube to squeeze out the top.

Where can I get replacement and does anyone have a part number for same?

Thanks

[Maven]

You may want to telephone RCBS about this as they are the successor to Lachmiller. It's possible that the Lub-A-Matic parts will fit your Lachmiller machine. If not, they may offer to replace it if you ship the unit to them.

[deltaenterprizes]

Try an auto parts store for "O" rings.

[nitroproof]

I sent RCBS an e-mail. Thanks for the advise.

[nitroproof]

RCBS is sending me one FREE!
The old Lachmiller is still under warrenty [smilie=w:

[johnlaw484]

Glad it worked for you. I have replaced my O rings several times over the years with over the counter rings from an auto parts store.

[TAWILDCATT]

all the lubers ar based on the lyman.old lymans look same as RCBS,and the Lackmiller is the same.check out an old lyman cat.