Glock36 FTF

[gasboffer]

My Glock36 wouldn't feed several cast bullets, with glock bbl or Bar-sto bbl. Tried Lee 230 TC Tumble Lube, Lee 230 RN TL, Lee 200 SWC, and Lee 200 RF. All would hang up on the feed ramp. Tried two different magazines. Finally got a Lee 225 RN 1R. VOILLA!! (For lthe benefit of you Yankees, that's HOT-D**N in Texican)
Ran 50 through both Glock and BarSto bbls today without a hiccup.
I'm a happy camper now!
Clyde

[randyrat]

May be you had them seated out a bit too far for all those other bullets. I never had a problem with them in the G30 with a stock barrel.
Possibly that SLIMLINE or G36 has a tighter chamber. I know most of the after market barrel/ chambers are tighter.
From your freindly Yankee. Randy

[fredj338]

Same thing happens w/ the XD in 45acp. Design flaw, they will not reliably feed a LSWC. SOme can be tweeked w/ OAL, but IMO, just go to a RN or TC. If you have problems w/ the TC a slightly longer OAL may help.