9mm using Lee's 356-125-2R mold Load ?

[BigBlack]

Okay guys I am loading for my 9mm using Lee's 356-125-2R mold. Mine water quenched drop in the range of 126-127 grains. Can I go with Hodgdon's 125 GR LCN load data for this one?

I have HP38 on hand and the load data for this powder is 3.9gr to 4.4gr

any suggestions or advise welcomed.

[Moxy]

Try using 4.3 gr of the HP38 . Every powder develops a sweet spot as far as accuracy goes and that is generally very good in a 9mm.

[BigBlack]

I'm using the lee auto disk 4.0 which throws a 4.1 to 4.2 charge. These shot good through my PT99 yesterday and cycled every round fed through it.

Thanks for the reply.