44 mag Saeco 441 SWC or rcbs 44-250 SWC

[Daddyfixit]

I have a freind who will sell me his Saeco 441, 3 cav mould or his RCBS 44-250, 2 cav. With WW they both drop at app. .430"/ 256gr. I've shot some of his reloads out of both my Interarms S/A & my Dan Wesson D/A. both seem to shoot better than my old eyes can see now. The Saeco boolet is slightly shorter from the last band to the tip. Any thoughts? What powder should I use?:?:

[Shuz]

For me, it boils down to speed. I like multiple cavity moulds in 44 caliber. I have several 4C Saeco moulds and a couple of RCBS 2C moulds. Both companies make fine products. I use a lot of Green Dot, 2400 and WC 820 in my .44 mags. If I had to pick just one, it would be 2400.

[Wayne S]

Both are good bullets and you know the RCBS throws .430. so to me I would go with the Saeco because of it being a 3 cavity vs the RCBS 2 cavity,
BUT look at the total cost, do they include handles ? or will you have to buy them ?

[fredj338]

I like the RCBS 350K but the Saeco is a good design too. If yo ucan get the 3cav for te same price as teh RCBS, jump on that one.

[Daddyfixit]

Thanks guys, just because of the three cavitys I'm going to go with the Saeco 441 for $60
I'll pick up a pound of 2400