Need some 308 FMJ projectiles - ideas?

[TRguy]

I know these aren't cast lead but looking for a source if anyone knows of one out there.

where you getting yours from?

I need once pulled or relatively inexpensive 308 FMJ 147 or 150gr projectiles

WAS getting them from http://www.ammunitionstore.com/pricelist_reloading_supplies.htm#223

http://www.ammunitionstore.com/Images/Reloading/R014.4.jpg

they are out of business.

Ideas, suggestions, I would appreciate the help.

Thank you.

[Flinchrock]

Weidners.com

[runfiverun]

those the ones with the funny angeled canellure?
my m-14 loved those, winchester sells a 147 fmj thats close if all else fails.

[jonk]

that's wideners not weidners but otherwise yes, they have them

[fredj338]

Widener's is probably your best bet. http://www.wideners.com/itemview.cfm?dir=278|281|727
Also try T&T: http://www14.inetba.com/tandtreloading/item127542.ctlg

[r6487]

pat's reloading has 7.62 x 54R 147 grn pulled bullets resized to 308 for 95 pr 1000 I bought 3k and have been pleased. bought mine when they were 80 pr 1000.

[TRguy]

Thanks guys, I appreciate the information. :bigsmyl2:

[ETG]

pat's reloading has 7.62 x 54R 147 grn pulled bullets resized to 308 for 95 pr 1000 I bought 3k and have been pleased. bought mine when they were 80 pr 1000.

Those are steel jacketed bullets.

If you don't mind tracers, Polygunbags has 145 grain with no pull marks for $45/K.

http://www.polygunbag.com/bullets.html

[MtGun44]

Hitech often has pulled projectiles. Look in the surplus powder area for the
sticky with the HiTech link.

Bill

[Rick459]

TRguy,
try here: http://www.goldenwestbrass.com/

i bought some 168 grn. .308's a couple o f weeks ago and they are pretty accurate out at 100 yds. gonna shoot some more of them on friday

Rick

[Zim]

always like gibrass.com, but no projectiles of any diameter. *Check back daily*
Like his optimism.

[walker77]

http://www.polygunbag.com I just looked and they have 308 tracers on sale. 1,000 for 45.00 And their web page was last updated on 11-11-09

[Rick459]

so i went to the range today to try out some more of the Goldenwest brass 168 grn. SPBT bullets. target was shot at 100 yds. the left target are the Goldenwest brass bullets. the right target are Sierra 168 BTHP bullets. i was suprised at the performance of these bullets compared to the Sierra's. the Sierra group is tighter but not by much. the rifle used is a Savage 110FP in .308.
Rick
http://i123.photobucket.com/albums/o301/rick4570/Picture-1.jpg

[lead-1]

Looks like a good shooting bullet to me, may have to try them out sometime for myself. Thanks for the update Rick459.