View Full Version : 220 Swift brass to 6.5 Jap
Shooter6br
10-30-2009, 01:46 PM
Just made up some 6.5 Jap brass from 220 Swift brass. What a chore but with patience can do. Followed a good article on the subject on line See pics
Shooter6br
10-30-2009, 01:48 PM
On the Guns Network google it great article 220 Swift to 6.5 Jap
bruce drake
10-30-2009, 04:14 PM
I expand the 220 Swift's neck and then trim to length with a brass tubing cutter at a measured mark for max length for 6.5 Jap. a few twists with a LEE Chamfer tool to remove any burrs and then it goes back into the resizing die for a full-length sizing.
A pretty easy setup without all the brass shavings like in your picture.
Shooter6br
10-31-2009, 09:39 AM
Thanks never thought of a tubing cutter . alot easiers Thanks
TAWILDCATT
11-01-2009, 07:53 PM
I use a mini cut off saw from harbor freight $29.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.