460350RFGC Group Buy is Here.

[SciFiJim]

460350RFGC Group Buy is Here.
460-350RFGCGroup Buy is Now Open.


Enough people have expressed an interest in the Ranch Dog #3 Poll to run this.

This Group Buy is for a 460-350gr Gas Checked Round Flat Nosed boolit that is a lube groove copy of the Ranch Dog TLC 460-350 RF bullet designed for the 45-70 Govt. & 450 Marlin rifles. The molds will be produced by Night Owl Enterprises (NOE) in their standard 1-5 cavity molds AND the RG Hollow Point molds.

The 460-350RFGC Group Buy will close on January 10th 2010. It will run longer than normal to get past Christmas. If we don’t have 15 orders by then, the close date will be extended until we do.

Flat Nosed Boolit

http://castboolits.gunloads.com/picture.php?albumid=170&pictureid=1405


Hollow Pointed Boolit
http://castboolits.gunloads.com/picture.php?albumid=170&pictureid=1406


Moulds will be machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.



The cost will be as follows:

Standard Molds
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
If you want to fashion different HP profiles, an extra blank pin would be $1.50

RG Molds
Two cavity RG2 HP mould $96.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG2 an extra blank pin set of two (2) would be $4.

Four cavity RG4 HP mould $126.00 Ea.
Includes one set of hollow point pins
and one set of flat nose pins.
If you want to fashion different HP profiles for the RG4 an extra blank pin set of four (4) would be $8.

Shipping and handling will be $10 per order and shipped priority mail. If you live outside the United States contact me, and I will work with you.



Lead time is 4-5 weeks after Group Buy closes. Tooling will be ordered once we get to 15 paid orders so don’t delay.

Instructions for using the Group Buy order system page are HERE (http://castboolits.gunloads.com/showthread.php?t=56550).

Use the Group Buy order system HERE (http://www.groupbuys.dnsalias.com/login.asp) to place your order. Use the link provided or use the link at the bottom of the page. Print two copies of the order sheet and mail both to me with your payment. Once we are ready to go, I will place the order with NOE. The molds will be shipped to me and I will distribute them. I will accept bank check, money order or PayPal + $4.50. If using PayPal contact me first.

We can get gas checked and non gas checked cavities cut in the same mould. Specify on the order sheet what your preference is.

The mold is machined to use LEE Commercial 6-Cavity handles (not included).
A Lyman, RCBS type top punch is furnished with each mould as well as a sample of Bull Plate sprue plate lube.

Visitors from other forums are welcome to participate in this group buy.
Email me at scifijim - at - gmail.com
Do the normal voodoo with the address to make it work, I don't want spambots to skim for my address.

Please leave a post here or PM me when you order and I will add you to the list.

I will post a running list of confirmed orders with username and options and a list of zip codes that payments have been received from in the next post.
Thanks
Jim

[SciFiJim]

Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. JMN322 - 3 cavity
5. rayzer - RG2
6. 15bobcat - RG2
7. high standard 40 - 2 cavity
8. Osiris - RG4
9. drobinson - 4 cavity (2 GC & 2 plain base)
10. GLL - single cavity w/HP + 3 blank pins
11. casey - 2 cavity
12. cigarman454 - 4 cavity
13. Barnowl - RG2
14. SciFiJim - RG2
15. kirill - 2 cavity
16. jebb45 - 4 cavity
17. btroj - 3 cvity w/HP
18. coford - 3 cavity
19. hornsurgeon - 4 cavity
20. ripshod - 2 cavity
21. DaveD - RG2
22. huntinmo - RG2
23. robo67 - 3 cavity (all plain base)
24. Old Caster - 4 cavity
25. zipdog - 4 cavity
26. Frozone - 5 cavity
27. kirb - RG4 (2GC & 2 plain base)
28. MrLau - 4 cavity
29. MANINBLACK - 5 cavity
30. ELFEGO BACA - 5 cavity
31. wamin - RG4



Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450

[6pt-sika]

Okay put me down for a "RG4" gas check mold .

[casey]

put me down for a 2c gas check. PM sent.

[JMN322]

Put me down for a 3 cavity GC.

[rob45]

Put me down for the "RG4" gascheck mold.

[SciFiJim]

Thanks everyone. I updated the list.

JMN, please place the order on the group buy pages as well.

Thanks
Jim

[bearcove]

I voted for this and want a 2-cav, 1 GC 1 PB. I'll pay up closer to the end.

Thanks Rod

[SciFiJim]

I put up a group buy for both weights. Since they don't close until January, my hope is that those that want both will have time to get both.

[15bobcat]

I'm in for an RG2 HP Gas Check type. Combined money order mailed out today.

Thanks,
-Harold

[roylowell]

will they cut a 4 cavity 2 350gc and 2 425gc ?
thanks roy

[SciFiJim]

Roy,
I spoke with SwedeNelson about that. It may be an option in the future to run two different boolits in the same mold, but is not available at this time. It is not the same as the .357 and .45 wadcutters where the depth could be changed to effect weight. Because of the gas check shank and base band these are not adjustable for length.
Thanks
Jim

[roylowell]

thanks for checking
roy

[high standard 40]

Put me down for a 460350-RNGC in 2 cavity. Order with payment in the mail.

[SciFiJim]

high standard 40 - I added you to the list.
Thanks
Jim

[OSIRIS]

Okay put me down for a "RG4" gas check mold thanks

[bearcove]

Hi Jim,

Change mine to a RG2 with an extra set of pins.

Thanks Rod

[SciFiJim]

Rod,
Did you still want 1 gas checked and 1 plain base?
Jim

[kirill]

Hello,

Read on the forum that these bullets are designed for Marlins. Are their chambers or barrels somehow different from other manufacturers?

Kirill

[SciFiJim]

Marlins have a reputation for having generous sized chambers.

[bearcove]

Jim, I think I will stick with the 1GC 1PB in the RG2. Al makes it so hard to decide with all the options.[smilie=l:

I want to size some down and try them in my 454. That's the reason behind the PB. And there is a good chance I won't need GC's in my 45-70's.

[drobinson]

Jim, please sign me up for a 4 cavity mold, two gc, two plain base.
Thanks

[SciFiJim]

drobinson - I added you to the list.
Thanks
Jim

[X-man]

Forgive my ignorance, but what is RG2 and RG4?

I'm looking at the 425 pattern for my Marlin Cowboy. Have to admit that I don't have a lot of experience casting really large bullets. Most of my casting has been for pistol, mostl .357 & .45/.44, along with some 7mm/.30 ca./.22 stuff.

Tried a few LEE aluminums, but didn't like them. Quality, not material. Have stuck with RCBS, LYMAN, SAECO, H&G since then.

What are the casting characteristics of this aluminum alloy when casting large/heavy bullets for the .45/70? i.e., how fast do they heat up? Get too hot? Need cooling? Warping dangers?

Moulds are available in 1-5 cavity...how does the aluminum react to multiple cavities in such a large bullet comparatively speaking?

I like the designs, but am in a quandry as to what exactly will best fit my needs as I'm a complete newbie when it comes to the .45/70.

Gas check or plain base? Gas checks are selling for over $40.00 per 1000 these days. What would be the drawback to going with the plain base?

GC or PB, which would make for a better hunting bullet on moose/caribou/black bear?

How much hassle is it to cast with a mould with one cavity cut for Hollow Point?

Any help in making a decision would be most welcome!:)

[rob45]

Forgive my ignorance, but what is RG2 and RG4?

What are the casting characteristics of this aluminum alloy when casting large/heavy bullets for the .45/70? i.e., how fast do they heat up? Get too hot? Need cooling? Warping dangers?

I like the designs, but am in a quandry as to what exactly will best fit my needs as I'm a complete newbie when it comes to the .45/70.

Gas check or plain base? Gas checks are selling for over $40.00 per 1000 these days. What would be the drawback to going with the plain base?

GC or PB, which would make for a better hunting bullet on moose/caribou/black bear?

Any help in making a decision would be most welcome!:)


Here is the link to the discussion on this before the group buy opened:
http://castboolits.gunloads.com/showthread.php?t=64809

Post #7 on that thread will answer your question on the RG hollowpoint designs. RG2 is a two-cavity mold; RG4 is a four-cavity mold.

Concerning your questions about the aluminum characteristics, remember that aluminum is very effective at transferring heat, while the steel molds are more effective at retaining heat.
To relate in casting terms, aluminum allows the mold to more quickly get to the proper operating temperature, and this is further accentuated with the larger bullets since you are transferring heat from more material. In my experience, aluminum molds perform best when run with a slightly hotter pour, and I suspect much of that is due to the fact that aluminum cools off quicker. On the other hand, many cite that this characteristic allows them to cast quicker. I use steel, brass, and aluminum and really have no preference of any one material over the others- I simply take into account that every mold is different and I adjust accordingly. Regardless of mold material, you simply adjust your alloy temperature and regulate your casting rhythm to what that particular mold seems to like.
Warping? Well, I suppose if you put the mold directly on a flame, you could warp it irregardless of the material construction.

You asked about gas check versus plain base. This is a preference based upon your desired load parameters. I have ran these type of bullets well over 2000 fps, so obviously a gas check is preferred. On the other hand, plain-based bullets have served me well up to around 1400 and make very good general-purpose loads. The deciding factors will be how fast you want to drive the bullet and the alloy/lube/fit combination. Keep in mind that you can have both GC and PB in the same mold at no extra charge.


My recommendation: Get at least an RG2 design with one cavity gas check and the other plain base. The mold comes with both hollowpoint and flat pins which are interchangeable. This would allow you to mix and match to create different types of bullets for different purposes.

Some possibilities for you:
1. A plain-based HP for practice, plinking, and the lighter hunting like deer. Driven slow, the bullet would be ideal with a softer alloy for good expansion. Economical due to lower powder charges, no gas check, and slightly smaller amount of lead used for the HP.

2. A plain-based flat point. Same criteria as above, only now you're tired of looking at a hole in your bullet.:smile: Seriously, a FP at the lower velocities offers excellent penetration. Easy on your shoulder, too.

3. A gas-checked HP driven at higher velocity. Sounds like something I would use on any of the thin-skinned game, including the caribou you mentioned.

4. A gas-checked flat point driven at higher velocity. Well, I guess this is your Bullwinkle and Smokey medicine.

If budget allows, go ahead and get the RG4. Since you already have the lead melted anyways, might as well make the most of it.:-)

Hope this helps.
Good Luck.

[SciFiJim]

rob45,
A remarkable explanation. I will be bookmarking your post for future reference when people ask for an explanation of the RG molds.
Thank You
Jim

[bearcove]

Rod,
Did you still want 1 gas checked and 1 plain base?
Jim

Hey Jim, I still want 1 gas check, 1 plain base in a RG2 mold.

Thanks for everything, Rod

[SciFiJim]

Rod, I got it changed for you.
Thanks
Jim

[X-man]

Thanks for taking the time Rob! Much appreciated. I decided to opt for a four cavity with two GC and two PB. I was tempted to go with a five and have the last one HP, but chickened out at the last minute! :) I was tempted to try a RG4 as well, but immediately after Xmas is not the time when I'm ordinarily flush with cash. Maybe next time!:)

[SciFiJim]

X-man, I added you to the list. PM sent.

[GLL]

I will take a single cavity GC with HP + 3 extra pins ! :)

Jerry

[SciFiJim]

And Jerry gets the usual.;)

Thanks
Jim

[jebb45]

SciFiJim:::
Can you e-mail or call me. I would like to talk to you, I have some questions about this mould. My new e-mail is jebb45@sterlingcomputercenter.net Thanks

jebb45

[6pt-sika]

Okay this doesn't look bad but we still need a couple more commitments and of course those that commit need to get those funds in by the magical day so this thing goes off without a hitch !

A little overzealouse you may say and you are most certainly CORRECT [smilie=w:

[SciFiJim]

A little overzealouse you may say

6pt-sika - Not overzealous, just know a good thing when you see it and excited about getting one. :)

[DUKE NUKEM]

Jim, If I can get it in a 5 cavity and no hollow point pins, plain base I'm in.
Just PM me where to send the funds.

[SciFiJim]

5 cavity plain base no hollow point it is. I will add you to the list and PM you.
Thanks
Jim

[Barnowl]

Order placed for:

1ea RG2 (1GC & 1PB)

Thanks, Kevin

[SciFiJim]

Barnowl - I added you to the list.
Thank You
Jim

[kirill]

Hello,

I sent in an invoice and payment for 2 cavity, gas check on both, mold. First time using the group buy page, so any mistakes please let me know.

Thanks.

Kirill

[SciFiJim]

Kirill - I found the order on the group buy page. Looks fine. I will add you to the list.
Thanks
Jim

[Barnowl]

Jim,
Payment sent today.

Kevin

[bearcove]

Hi Jim, I think this might be a great mold for me. I Have a Marlin 1895, Two Encore barrels one 20" one 15" in 45-70. I also want to shoot these in my 454s and 45 Colt. So when we get close to the end I might change to an rg4 instead of a rg2. Swede's prices and quality make me want one of everything.:Fire:

[SciFiJim]

bearcove - The end is two weeks away. I'll wait for your decision.
I agree on wanting one of everything. There are some really good choices that are hard to pass up.

[bearcove]

Yeah, I just bought another share in my secondary pension plan. If they gave me the right #s this time Wed will be a good day. Then I'll contact Swede and get a "subscription". ( Just send me three of each) ;-)

[bearcove]

Check post on 432-300

Thanks Rod

[SciFiJim]

There has been some discussion about the timing of the close dates of the group buys that I have running. I posted the following in one of the other group buys and felt it pertained to all of them, so I am posting it here as well.
Quote:

To Everyone else about close dates. When I open a group buy I set a close date 2 months after opening. This allows everyone interested to take a look at it and decide if it is something that they want to participate in. In the case of the 460 molds I set a date a week and a half after New Years to give people time to figure out how Christmas went.

Shooting, Casting and Reloading is a hobby. It is something that should be accomplished with extra funds that may be available. If you are taking money from your family's needs to do this, then you need to reassess your priorities. We joke about casting as an addiction, but if you need help, please get it.

Close dates are set so as to give some expectation of when to expect movement. Group buys are not placed on the manufacturing schedule until received by NOE with the funds to pay for them. There are expenses that are incurred before manufacturing starts (such as ordering the tooling). Unless the minimum number of molds is met it is not financially feasible to start the process on a mold.

There has been some discussion about getting in on a group buy between the close date and the production date. That policy still has to be determined. Something to keep in mind though. If a group buy doesn't close it doesn't get on the schedule. This group buy is THE perfect example. More than the minimum number of people expressed an interest in it before I opened it. However, things happen and only 6 of the molds ordered have been paid for so far. The order will NOT get placed with NOE until at least 15 have been paid for.

If someone thinks that I am getting free use of the money until the order is placed with NOE they are mistaken. The funds are sitting in my safe, not in my bank account. I normally don't deposit the checks or money orders until about a week before I place the order with NOE.

If someone that has ordered and paid for a mold in a group buy that I have not sent to NOE would like their money back, I will cheerfully return it. I have done so in the past and I am willing to do so again. If you have ordered a mold and not paid but need to cancel, that is fine as well. I would appreciate it if you would make a serious commitment to buy when you order. However, as in phaessler's case, unexpected stuff happens and your responsibility to your family comes first.

Also, PLEASE, name calling about this is unnecessary. We all do this for enjoyment. If someone has a problem with anything that I have done or said, please PM me and we will discuss it. I am always open to listening to good ideas, some I will even use. ;)

Thanks for sharing in a hobby that I have grown to love in this last year.
Pour a hot one!
Jim

p.s. I will be copying and pasting this into my other group buys as well.

[SciFiJim]

I will be leaving in the morning to visit the inlaws for a few days. Since they don't feel the need to have internet access I will be out of touch until I get home on New Years eve. I will answer PMs and questions then. My mail is being held at the PO, so any payments sent will be safe. Have a Happy New Year everyone.

[btroj]

Just placed order for 3 cav- all GC, 1 HP. Check in mail tomorrow.

Brad

[drobinson]

Payment sent

[coford]

Jim,

I placed an order for a 460350 RFGC 3C

Money is being mailed today.

Thanks!

[hornsurgeon]

jim-

placing my order for the 460350. i sent a pm with questions.

[casey]

Jim, Payment sent out today. Thanks, Kirk

[DUKE NUKEM]

Jim, I think I'm just going to stay with my 350 grain Saeco Gas checker.

[ripshod]

Payment sent for 2 cavity gas check mold.Ripshod

[ripshod]

Payment sent for 2 cavity gas check mold.Ripshod

UPDATE.Will send payment on Saturday.The Post Office window closed before I got there.Ripshod

[SciFiJim]

Thanks everyone,
I am back and have the new orders posted.
Thanks
Jim

[huntinmo]

I am ordering an RG2 gas check mold, payment sent in the mail today.

[SciFiJim]

huntinmo - I added you to the list.
Thanks
Jim

[robo67]

Jim,

I've sent you an email.

thanks,
Mark

[SciFiJim]

Mark,
I got your email and added you to the list.
Welcome to CastBoolits.
Thanks
Jim

[zipdog]

Jim, I just placed an order for a 4 cav gas check. Check will go out tomorrow at latest, possibly today.
Rusty

[zipdog]

Jim, I just placed an order for a 4 cav gas check. Check will go out tomorrow at latest, possibly today.
Rusty

Check went out today.

[SciFiJim]

Added orders and paid zip codes. This one closes in four days. If you have been kicking the tires on it, now it the time to move.

[kirb]

Jim,

I just ordered an RG4 wanted 2 cav GC 2 Plain base I did not see that option. I will get money in the mail on monday. Let me know if I have to do something different.

Kirb

[SciFiJim]

Kirb,
Just write on the invoice what you want.
Thanks
Jim

[ELFEGO BACA]

I would like to order a 460350RFGC 5C but i am unable to place an order requesting plain bases. Your assistance would be appreciated.

Elfego

[Jon K]

If there is to be a 460350 PB version, I'm interested!!!

Jon

[SciFiJim]

Just write on your invoice how many cavities that you want plain base. I forgot to add that option when I was typing in all of the different options.
Jim

[kirb]

Jim,

thanks money on the way

Kirb

[SciFiJim]

I am going to go ahead and put closed on this one. Please get your payments in so that I can get it on the schedule for manufacturing.

[6pt-sika]

Works for me [smilie=s:

Hmmmm think i just said that somewhere else a minute ago :veryconfu

[ELFEGO BACA]

Missed it!

[SciFiJim]

Elefego Baca, You didn't miss it, you are #31 on the list.


:)
Jim

[wamin]

I'd go for a 4 cav HP if I can get into this buy

[Slow Elk 45/70]

I'll take a 2 cav HP if I'm not toooo
late, missed this thread...SL

[SciFiJim]

I closed the group buy a week ago and then talked to SwedeNelson. Long story short, I will continue to take orders until right before (two weeks) production starts. So, I will add you to the list.

Wamin - do you want a RG4 or a four cavity with a single HP?

Slow Elk - same question only two cavity.

[hornsurgeon]

did sweed give you a tentative production date?

[SciFiJim]

According to the latest schedule SwedeNelson has posted HERE (http://castboolits.gunloads.com/showthread.php?t=72802), it looks like late June.

[Ltdshooter]

Looking at this tread it appears that I can still jump in and place an order. Please let me know.

[6pt-sika]

Looking at this tread it appears that I can still jump in and place an order. Please let me know.

Yes you certainly can !

[Slow Elk 45/70]

SiFiJim, yes I just want this mold in the 2 cav GC HP with pins, not a 4 cav if this is possible, if not let me know, thanks S.L.

[phaessler]

I might get in on this one yet, is he going to take orders on others until then do you know ?

Thanks

Pete

[6pt-sika]

I might get in on this one yet, is he going to take orders on others until then do you know ?

Thanks

Pete

None of the 3 are scheduled to go into production until mid june . If I'm not mistaken he will comtinue taking orders and or money until a couple weeks before production starts !

So with that being said you might be able to get a 432-300GC after all :bigsmyl2:

[Tazman1602]

6-Pt -

So you're saying even if the GB is closed if the molds haven't gone into production yet Swede or the honcho will stay take orders -- of course not like three days before it goes into production but say if I wanted to get in like a month before they go he might still take an order?

If so that works out great and like you say I might be able to get in on that 432-300 buy also. Just getting back to work this time of year and things are still tight but will loosen up considerably in a couple of months.

Thanks,

Art

None of the 3 are scheduled to go into production until mid june . If I'm not mistaken he will comtinue taking orders and or money until a couple weeks before production starts !

So with that being said you might be able to get a 432-300GC after all :bigsmyl2:

[6pt-sika]

6-Pt -

So you're saying even if the GB is closed if the molds haven't gone into production yet Swede or the honcho will stay take orders -- of course not like three days before it goes into production but say if I wanted to get in like a month before they go he might still take an order?

If so that works out great and like you say I might be able to get in on that 432-300 buy also. Just getting back to work this time of year and things are still tight but will loosen up considerably in a couple of months.

Thanks,

Art


Art going by what I either read or SciFiJim told me he said he was taking orders until close to production time ! And they are slated to start with the 432-300 first sometime in june and then the 460-350 to follw and the last would be the 460-425 ! Send Jim and email and confirm this but what I am telling you I take to be correct !

[6pt-sika]

Art , closed might not be the correct word to use !

There is enough money on hand for the molds to guarantee 15 plus in each buy so they have been scheduled and tooling ordered ! Technically none of the 3 have closed yet ! I would assume they may very well not close until may sometime , but thats just my guess !

[6pt-sika]

I closed the group buy a week ago and then talked to SwedeNelson. Long story short, I will continue to take orders until right before (two weeks) production starts.

Here you go Art I knew I read this somewhere !

And it's my understanding he is doing this with all three of the RD molds and maybe others as well !

[phaessler]

This puts me in good shape with work picking up hopefully enough to get in line too.
Thanks all.

Pete

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.




Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. JMN322 - 3 cavity
5. rayzer - RG2
6. 15bobcat - RG2
7. high standard 40 - 2 cavity
8. Osiris - RG4
9. drobinson - 4 cavity (2 GC & 2 plain base)
10. GLL - single cavity w/HP + 3 blank pins
11. casey - 2 cavity
12. cigarman454 - 4 cavity
13. Barnowl - RG2
14. SciFiJim - RG2
15. kirill - 2 cavity
16. jebb45 - 4 cavity
17. btroj - 3 cvity w/HP
18. coford - 3 cavity
19. hornsurgeon - 4 cavity
20. ripshod - 2 cavity
21. DaveD - RG2
22. huntinmo - RG2
23. robo67 - 3 cavity (all plain base)
24. Old Caster - 4 cavity
25. zipdog - 4 cavity
26. Frozone - 5 cavity
27. kirb - RG4 (2GC & 2 plain base)
28. MrLau - 4 cavity
29. MANINBLACK - 5 cavity
30. ELFEGO BACA - 5 cavity
31. wamin - RG4



Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83861

[Tazman1602]

Thanks so much man! At first I was kind of disappointed in the production dates but I'd rather see first quality work than fast work anyday AND this puts me in the postion of being able to get in on all three of these GB's!!!!

You guys are a bad influence but I am having the time of my life casting bullets that actually WORK.........................!!

Thanks again 6-pt, I'll keep watching Swedes production schedule, personally I think that having the long lead times and being able to order up to two weeks before they go into production will really boost the total sale of molds on these group buys.

Art

Here you go Art I knew I read this somewhere !

And it's my understanding he is doing this with all three of the RD molds and maybe others as well !

[Meatco1]

Darn Jim!

Ok, another PM is on the way for you, as I will add myself to this list for the 3 cavity standard.

Thanks,

Richard

[6pt-sika]

Thanks so much man! At first I was kind of disappointed in the production dates but I'd rather see first quality work than fast work anyday AND this puts me in the postion of being able to get in on all three of these GB's!!!!
You guys are a bad influence but I am having the time of my life casting bullets that actually WORK.........................!!
Art

I have been working on a couple HEAVY versions of the Ranch Dog design for the 444 and 45-70 !

One or two of these may intrest you also !

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.




Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41



Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841

[Russ68]

An order for one 460350 RFGC 2C (both PB cavities) placed via the Group Buy order site. Payment is inbound. Thanks. :cbpour:

[SciFiJim]

Russ68, Welcome to CastBoolits. I will add you to the list.
Jim

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.




Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41



Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841
81091

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.




Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity (2 GC & 1 plain base)
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41



Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841
81091
53546

[largom]

JIM, My order for a 460350 RFGC RG2 going in the mail today. Zip 21787

Thanks, Larry

[SciFiJim]

Largom - PM sent.
Jim

[joecool911]

Just ordered a 2 cavity gas check 460-350 mold. Glad it is being run again!

[Jon K]

I'll take a 5C Plain Base.
Just placed the order, Check will be in the mail in the AM.

Thanks,
Jon

[SciFiJim]

Jon,
I added you to the list. I will PM you when the payment arrives.
Thanks,
Jim

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.

Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity (2 GC & 1 plain base)
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41
30. Meatco1 - 3 cavity
31. Russ68 - 2 cavity (both plain base)
Supplemental Orders
32. Largom - RG2
33. joecool911 - 2 cavity
34. Jon K - 5 cavity (all plain base)


Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841
81091
53546
Supplemental Payments
21787

[Little Doc]

I want one of these. Make it a 5cav 3plainbase and 2 gc. send me a pm and tell me how to get you paid.
thanks,
m

[Little Doc]

was i too late on this mould? no responce to my request on 2-24. if it was closed i missed it someplace. if still open i want in.
m

[rob45]

was i too late on this mould? no responce to my request on 2-24. if it was closed i missed it someplace. if still open i want in.
m

Hello, Little Doc!

Send a PM to SciFiJim to be sure it's still open. On the group buy order page, it is showing it still open, but wouldn't hurt to ask SciFiJim to be sure.

[SciFiJim]

Little Doc,
Sorry I missed the post on 2/24. Yes, the group buy is still open. When you print the invoice that the group buy page generates, my mailing address in on it. If you want to pay with PayPal or GunPal (just got that one setup) let me know and I will PM you additional info.

I will add you to the list for a 5 cavity (2GC & 3 plain base)

Thanks,
Jim

[SciFiJim]

The #2 post is old enough that I can no longer edit it to add payment zip codes. I will now be adding them at the end of the thread.

Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity (2 GC & 1 plain base)
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41
30. Meatco1 - 3 cavity
31. Russ68 - 2 cavity (both plain base)
Supplemental Orders
32. Largom - RG2
33. joecool911 - 2 cavity
34. Jon K - 5 cavity (all plain base)
35. Little Doc - 5 cavity (2GC & 3 plain base)


Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841
81091
53546
Supplemental Payments
21787
92530

[Little Doc]

thanks SciFiJim. i went to the order page and got the info. i do not have a printer on this puter so i will send all info and payment tomorrow. thank you. let me know when you get the check.
mike

[SciFiJim]

Little Doc,
Will do.
Thanks,
Jim

[goofyoldfart]

scifiJim: thank you for your prompt pm back to me. I know that I must sound pretty ignorant, but I have never done one of these before. I would like the 311-165-GCRF in an RG4 with only two of the cavities GC and two of the cavities FB (flat based) with an extra set of pins so that I can balance two of the cavities as HP and two as FB. IS possible to Do??? Thank you.

Wiersy111: Also a great thank you, too. thanks for the come back and I appreciate the sig line.

Edited to add: Damn, did I place this in the wrong thread???[smilie=b:

[SciFiJim]

Orders
1. 6pt-sika - RG4
2. rob45 - RG4
3. slaird - RG4
4. rayzer - RG2
5. 15bobcat - RG2
6. high standard 40 - 2 cavity
7. Osiris - RG4
8. drobinson - 4 cavity (2 GC & 2 plain base)
9. GLL - single cavity w/HP + 3 blank pins
10. casey - 2 cavity
11. cigarman454 - 4 cavity
12. Barnowl - RG2 (1 GC & 1 plain base)
13. SciFiJim - RG2
14. kirill - 2 cavity
15. jebb45 - 4 cavity
16. btroj - 3 cvity w/HP
17. coford - 3 cavity (2 GC & 1 plain base)
18. hornsurgeon - 4 cavity
19. ripshod - 2 cavity
20. DaveD - RG2
21. huntinmo - RG2
22. robo67 - 3 cavity (all plain base)
23. Old Caster - 4 cavity
24. zipdog - 4 cavity
25. Frozone - 5 cavity
26. kirb - RG4 (2GC & 2 plain base)
27. MANINBLACK - 5 cavity
28. ELFEGO BACA - 5 cavity
29. wamin - RG41
30. Meatco1 - 3 cavity
31. Russ68 - 2 cavity (both plain base)
Supplemental Orders
32. Largom - RG2
33. joecool911 - 2 cavity
34. Jon K - 5 cavity (all plain base)
35. Little Doc - 5 cavity (2GC & 3 plain base)


Zip Codes of paid orders
22960
47711
92603
N6E3V3
12586
70737
Australia 4361
29063
91106
16214
47302
93553
94118
80751
68005
69341
54303
16347
63012
85205
63017
15089
99504
29205
06450
83864
P7G1M3
83276
20841
81091
53546
Supplemental Payments
21787
92530
74702