PDA

View Full Version : Range report on 2nd batch of CB



rwt101
10-21-2009, 07:06 PM
I loaded up some 9mm 125 gr RN cast boolits with 3.8 grains of bullseye powder. OAL of 1.130. This time I made some pan lube with 1lb paraffin--1lb bees wax and 1 tube molly lube.

I shot them out of my Hi-Point c9 and my Hi-Point 995TS. The pistol did not like the OAL. I will have to adjust that. At 7 yds it was grouping about 7-8 inches.

The carbine loved them. I have posted the target from the 995. My POA is off and I have to site it in better, but it did well at 25 yds. So I am very happy, and I did not see any leading in either one.

Bob T:smile:

HORNET
10-21-2009, 07:49 PM
It'd be too easy if both liked the same load, especially right off.

Shiloh
10-21-2009, 07:55 PM
You're on your way. Now comes the experimenting to see what works best.

Shiloh

rwt101
10-21-2009, 11:19 PM
Yes I will be trying some differnt loads. I have to get the red dot sited in.
Bob T